Sway bar bushing - 2 options listed - TTORA Forum
 
LinkBack Thread Tools Display Modes
post #1 of 4 (permalink) Old 04-30-2019, 01:25 PM Thread Starter
Senior Member
 
jwtacoma's Avatar
 
Join Date: Apr 2007
Location: Newport News, VA Temporarily
Posts: 167
Sway bar bushing - 2 options listed

While I was under my truck last weekend replacing my outer tie rod and boot I noticed my sway bar stock 'end' bushings severely mushed and cracking badly - I'm sure they're stock.

The only ones I can find are from Energy Suspension. They listed 2 options for the bushings - a 26mm and a 27mm. Not even sure what's measured, so I have no idea which of those I have.

I have a set up steering rack bushings from energy I installed about 5 years ago and they're holding up really well.

Anyone ever run into this and know what this measurement is ? Does 1 mm really matter ? Perhaps it's the diameter of the hole of the end eyelit hole of the sway bar?

TIA

95 Tacoma 3.4L 4X4 Manual
07 Lexus RX400H
05 Suzuki VStrom DL1000
jwtacoma is offline  
Sponsored Links
Advertisement
 
post #2 of 4 (permalink) Old 04-30-2019, 05:30 PM Thread Starter
Senior Member
 
jwtacoma's Avatar
 
Join Date: Apr 2007
Location: Newport News, VA Temporarily
Posts: 167
After some more searching, I found out that the measurement is the outer diameter of the sway bar near the center bushings - all I have to do is break out my digital calipers and measure.

95 Tacoma 3.4L 4X4 Manual
07 Lexus RX400H
05 Suzuki VStrom DL1000
jwtacoma is offline  
post #3 of 4 (permalink) Old 05-01-2019, 11:19 AM
Member Dismemberer
 
ShowStop's Avatar
 
Join Date: Dec 2004
Location: SoCal
Posts: 18,124
Garage
Send a message via Yahoo to ShowStop
IIRC, the 26mm size is for all models except the TRD suspension which has the 27mm upgraded size.

https://www.ttora.com/forum/25-suspe...-bar-size.html
ShowStop is offline  
 
post #4 of 4 (permalink) Old 05-03-2019, 10:14 AM
Newbie
 
Join Date: May 2019
Posts: 1
Quote:
Originally Posted by ShowStop View Post
IIRC, the 26mm size is for all models except the TRD suspension which has the 27mm upgraded size.

https://www.ttora.com/forum/25-suspe...-bar-size.html
I read similar information here https://bestgrillcover.com/
Markuss is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the TTORA Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
Poly Sway Bar Bushings CRSturdivant Good Deals/Freebies 1 10-20-2007 10:06 PM
need sway bar connects a.contreras89 Wanted 15 07-23-2007 08:20 AM
Using the stock sway bar Timbuddha Solid Axle Swap Tech 19 07-07-2007 11:12 AM
sway bar clunk after lift... Chief Suspension 4 12-03-2006 12:43 PM
Cutting sway bar? 97TacoDude Early Tacoma Tech 3 01-21-2005 07:55 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome