Join Date: Sep 2008
Location: Black Canyon City, AZ. Work in SoCal
What Toyzilla Came With...
Here is an (UPDATED) list of some of the extras that came on this '85 4Runner...
Front Lock-rite locker
Rear Detroit Locker
Cryo'd 5.29 gearing, F&R
Chevy 63's in the rear, (wheelbase is ~106-inches)
AllPro 3-inch buggy springs up front
Marlin extended shock hoops on the front
14-inch travel shocks front and rear
Diff armor, F&R
Front axle gussets
Custom 1.5-inch diameter .120 wall exo cage with .240 wall double thickness (.120 wall 1.25 inch dia tube inside .120 wall 1.50 dia tube) at the A-pillar
Custom rock sliders
Custom tube bumpers F&R
Rear swing-out spare tire carrier, jerry can holder and Hi-lift mount
9,000 lb. winch, w/ roller fairlead and cable line
All-Pro Triple-X dual-case cross member with pinion e-brake
Reinforced motor mounts
Trail Gear Hydro assist steering with plumed IFS streering box
Marlin Ultimate dual crawler transfer case's with 4.70-1 in rear
220:1 crawl ratio
Twin sticks on rear T-case
Rebuilt motor with new plugs, wires, etc.
37 x 12.5 Creepy Crawlers
American Racing steel 32 bolt 15x10" bead locks.
(with matching brand new full-sized spare Creepy Crawler)
Custom crawler double cardan drive line's from Arizona Driveline's
New clutch & fly wheel & new clutch master cylinder.
'87 rear axle completely rebuilt with new bearings, seals, brake drums & brakes
Front axle re-built -- bearings, seals, bushing, knuckles, inner & outer felts
Bobby Longfield 30 spline axles and super birfields
New from Marlin S-80 Land Cruiser vented rotors & brakes
Land Cruiser master cylinder, new extended braided brake lines F & R, with 2" spacers. (Taco Ray did most of this work)
Black Diamond electric radiator fan.
Rear frame plated
Toy Box Auto all new 2" exaust with cat
New fuel pump & sending unit inside the tank
Chromo Hub Gears and new sleves
Aisin manual locking hubs
1.5-inch wheel adapters up front
2-inch wheel adapters in the rear
Extended diff breather tubes
Spare inner and outer front axle shaft
Spare rear axle shaft
Pair of half doors (unfinished)
I don't know whether the rear axle shafts in it right now are factory, or stronger aftermarket shafts. But yeah, its pretty well built and just needs some maintenance.
Last edited by Stealth 4x4; 09-11-2012 at 11:18 AM.