Join Date: Sep 2008
Location: Black Canyon City, AZ. Work in SoCal
Progress on T-case Crossmember Mount
Got the 1/4-inch inner frame plating cut out with holes for rosette welds. It's about 16 by 5 inches.
Finished grinding off the old welds as shown in the last post, bent the plate to form to the bend along the inside of the frame rail, and got 'er all welded in thanks to MrDoug.
Going to pick up Melanie at the airport pretty soon, so might not get much done today... Next up is to fabricate two new teardrop mount tabs out of more 1/4-inch plate, drill them out for the bolt to pass through, and weld them in place to the new inner frame plating.