TTORA Forum banner

Search results

1-20 of 198 Results
  1. Drive Shaft Options

    Tech
    His locked up completely, won't' budge either way at all, can't even pull it apart with winch
  2. Drive Shaft Options

    Tech
    I'm kinda leaning toward the one from Dave's right now but then my truck is street driven so balance is a big difference maker for me I have seen one in person and it seemed pretty stout and the owner was pleased with it I'm planning on ordering the one from Dave's in a few weeks unless anyone...
  3. dirty 30 installation

    Tech
    Thanks guys, I dropped the knuckle off at a buddy's shop Fri and let him deal with it, will pick it up tomorrow am and should have new trail gear studs and washers Thurs When I get the new studs should I red loctite them in and then use blue loctite on nuts or other suggestions?
  4. dirty 30 installation

    Tech
    its mentioned that clearancing the inside of the knuckle may be required. Is this for clearance to slide it in? Or is it for it to be able to pivot around once in there? mine slides right in and appears to be fine (with everything disassembled) do I need to grind anything or as long as...
  5. Spring Fling 2013

    Events
    Probably (depending on what works for Eric) leaving mid morning thurs and taking 76 to 80 Just talked to Charlie and he plans on driving out Fri afternoon and just wheeling Sat
  6. The Official Ohio Post Whore Thread

    Off Topic
    My new fair weather ride. 2009:Kawasaki Vulcan 1700
  7. Spring Fling 2013

    Events
    1 truck, myself and Eric
  8. Wellsville 11/11/12

    Events
    Cool
  9. Wellsville 11/11/12

    Events
    Yep, that's fine
  10. Wellsville 11/11/12

    Events
    I'm in
  11. wellsville?

    Events
    I'm down as soon as we get my floor patched up and brake lines taken care of
  12. trail gear disc brake conversion kit

    Tech
    90% certain I already upgraded to the 1" bore master cylinder, if anyone remembers feel free to chime in, I know I replaced it but can't find receipt Looking at sky's site there must be a difference in how the rotor fits up as they sell different rotors for 79-85 and 86-95. They do not offer...
  13. trail gear disc brake conversion kit

    Tech
    Any idea why it could not be used on a pre 86 axle? Kinda interested in this but it says it's for 86-95 trucks
  14. Need Help !!

    Tech
    Cheapest thing im finding so far is www.trentfabrication.com their chassis starts at $2500 as a kit with you doing notching and welding Oops, looks like the z-chassis on the link that Todd posted is cheaper $1895 starting
  15. Need Help !!

    Tech
    the style of chassis Pete was looking at was a two seater that used a rear mounted honda 4cyl from a front wheel drive with the transmission acting as the transfer case sending power both ways (no low/high range just transmission) So far all the chassis kits I'm finding are front engine, mostly...
  16. 85 toy

    General Discussions
    mcmaster carr has m12x1.25 nylocks for future reference www.mcmaster.com part # 90576A141, $11.67 per pkg of 25
  17. replacement floor panels

    Tech
    Sounds good, let me know when/ where you wanna take a peek, your more than welcome to use the bender anytime and depending on what you need you may be able to talk me into buying a smaller die, I'd like to try building some tube doors over the winter
  18. replacement floor panels

    Tech
    Anybody make replacement cab floor panels? My drivers side is starting to look dangerous Jc Whitney has passenger side but no driver side listed and it looks like that manufacturer no longer makes them
  19. Truck Fest 9/15

    Events
    Im going, can meet wherever
  20. wellsville?

    Events
    I think my truck is ready, any Sunday should be fine
1-20 of 198 Results
Top