[johndeesmith]

Where can I get a 1/2" lift block? I've got the "lean" on the driver's side and won't stand for it. My trucks 1/2" lower in the front and rear. I figured I can use a bloce for the rear, but I'm not sure about the front. I've got a 4" procomp sus lift, so maybe a 1/2" spacer between the big procomp spacer and the top of the coilspring. Any suggestions?

 

[wslytoy]

Where can I get a 1/2" lift block? I've got the "lean" on the driver's side and won't stand for it. My trucks 1/2" lower in the front and rear. I figured I can use a bloce for the rear, but I'm not sure about the front. I've got a 4" procomp sus lift, so maybe a 1/2" spacer between the big procomp spacer and the top of the coilspring. Any suggestions?

stacking blocks wouldn't be smart... I'd be best to just either rebuild your spring pack or get some deavers or alcans. As far as the front goes, you might wanna get new front coils so it'll be even. Peace, Wes

 

[Pete]

stacking blocks wouldn't be smart... I'd be best to just either rebuild your spring pack or get some deavers or alcans. As far as the front goes, you might wanna get new front coils so it'll be even. Peace, Wes

It's likely to always lean, mine did with the factory TRD stuff and it does the same now with the Deavers.

Some seem to lean more then others, not sure why. Mine has a serious lean, even people who don't care about cars and trucks sometimes notice.

It's enough so that if I ever hear of someone successfully eliminating it with a block I'd probably do the same.

 

[hytenor]

Where can I get a 1/2" lift block? I've got the "lean" on the driver's side and won't stand for it. My trucks 1/2" lower in the front and rear. I figured I can use a bloce for the rear, but I'm not sure about the front. I've got a 4" procomp sus lift, so maybe a 1/2" spacer between the big procomp spacer and the top of the coilspring. Any suggestions?

you didn't mention you had the PC kit, LOL you can't stack spacers up front but you can switch to adjustable coilovers to fix the front lean. I believe you can add a preload spacer, however, and one that is 1/4" thick will give you 1/2" of lift.
If you already have the PC blocks in the rear with your Deavers you don't want to stack anything else back there either. RB can make a custom block 1/2" taller but blocks in general are bad news on Tacomas; they have enough trouble with axle wrap as it is.