TTORA Forum banner
1 - 19 of 19 Posts

· Registered
Joined
·
59 Posts
Discussion Starter · #1 ·
ok i have a 96' 2.7 auto trans and 33's on stock gears. i want to regar eventually. i want to know about a supercharger. i have looked on the trd web site and cant find a 96' or a 2.7. isnt there a kit that is for my truck? im only 16 and i have about regearing and i know i should BUT i want to know about sc's. any info would be great
thanks,
Evan
 

· Registered
Joined
·
59 Posts
Discussion Starter · #5 ·
thanks gadget! like i said im 16, and i need more power. i habe about alittle more than1000$ saved so when i purchase it will be late summer after working and savin all summer. my truck just rolled over 144000 miles. it hasent been ran hard should i be worried about internals? and how complete is the kit? buy kit i can bolt on and drive and upgrade later?
 

· Registered
Joined
·
1,242 Posts
thanks gadget! like i said im 16, and i need more power. i habe about alittle more than1000$ saved so when i purchase it will be late summer after working and savin all summer. my truck just rolled over 144000 miles. it hasent been ran hard should i be worried about internals? and how complete is the kit? buy kit i can bolt on and drive and upgrade later?
Mileage really is not a big deal these days. It is condition that matters.

If you have done the maintenance properly on it, regular oil changes and such you should be fine. I would do a compression check before you commit to a supercharger and that will tell you the overall health of the engine. If it is in spec you should be fine.

When you are ready just let us know.
 

· Registered
Joined
·
59 Posts
Discussion Starter · #8 ·
ok so ill do the compression check and if its in spec ill hopefuly be able to jump on a sc! if i buy the kit at the listed price i think it was about 2600$ is it a weekend bolt on? will i have everything so after all the components in the kit are on i will be able to drive it?
thanks again,
Evan
 

· Cracker
Joined
·
7,114 Posts
DCabTaco said:
Strike 2 Chris,.... lol.

He goes by Gadget, I've noticed only Dick Foster calls him by his real name.
yeah, so much for trying to be helpful & courteous. I thought I'd seen 'em both post, and I didn't figure the boss man would be up that late. :confused:

I'll just quit trying.... :)
 

· Smoked Out!
Joined
·
1,939 Posts
valkyrie said:
yeah, so much for trying to be helpful & courteous. I thought I'd seen 'em both post, and I didn't figure the boss man would be up that late. :confused:

I'll just quit trying.... :)
Yeah, I don't know what it is, but it's just easier to remember Gadget, than lets say bob, or joe, or even STEVE. That is how I see it. As for your screen name. I always forget how to spell it so when I refer posts to you , I go by Chris from traparts4u since that is easier to remember than valkyrie. lol. It's all good in the end everyone gets the help they need.
 

· Registered
Joined
·
59 Posts
Discussion Starter · #14 ·
ok so ill need injectors, and...what eles for the fuel system? and ill need the computer stuff,managment stuff what does that that consist of? and is it possible to say about 3000$ and out the door for the injectors(fuel stuff) and computer managment parts?
THANKS this i a really huge help,
Evan
 

· The Satanic Panic
Joined
·
626 Posts
nice,i was curious cuz ive seen them with different boost depending on the year of the truck some with 4 and some with 8 psi
 

· Registered
Joined
·
59 Posts
Discussion Starter · #19 ·
Can i get more boost out of a smaller pulley? what is the max boost i can run, with out hurting the engine?
Thanks,
Evan
 
1 - 19 of 19 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top