TTORA Forum banner
1 - 20 of 20 Posts

· Registered
Joined
·
999 Posts
Discussion Starter · #1 ·
This has probably already been discussed, but im wonder how much motor oil a 2.7L Holds? I put a 5 quart container in when i change my oil and it still reads low.
 

· Registered
Joined
·
999 Posts
Discussion Starter · #5 ·
Alright, Thanks for helping me out guys, What kind of Oil Filter do you use? I use FRAM
 

· Registered
Joined
·
619 Posts
I would recommend using ANYTHING OTHER than a Fram! For about the same price as a Fram, you can get a good filter that uses metal endcaps unlike the cardboard ones on a Fram.
 

· Registered
Joined
·
121 Posts
yes...

take a plastic bag (like the ones from the grocery store) and turn it inside out. Then, from underneath the truck (that's how I get mine out...), put it over the filter (after you've loosened it) then put the bag right side around the filter. Then turn the filter...the bag will catch most of the oil. Do it when oil is cold so it doesn't melt the bag. It works for me... :xsmokin1:

You can also use a plastic 2 liter bottle...cut the top off. It's the same principle...catch the oil before it gets all over your arm.
 

· Registered
Joined
·
368 Posts
Mine takes about 5.5 and I pay two and some change for the wix oil filters at napa.
 
1 - 20 of 20 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top