[TexasTRD]

i just ordered a 3.5 fabtech lift and wanna install either a 1.5" or 2" body lift...i dont want it to be too noticable that i have a body lift so would 2" be too much in that case? or does 2" still look good? thanks for the replys

 

[YoTRacer158]

2" looks fine on all the trucks i've seen

 

[Oppositeboy]

I have a 2". Looked fine when I was still IFS. I ran 1.5" OME lift + 2" bl for 33x12.50s.

 

[shortbus]

I got a 2" and it looks fine to me.

 

[4x4crazy12345]

do you guys have any pics I was thinking about running 882's with 2'' of body lift.

 

[Oppositeboy]

do you guys have any pics I was thinking about running 882's with 2'' of body lift.

You will probably get another 1"-1.5" over me (I had used 881's), but here are some not so good pics.

In "action"
http://www.norcalttora.com/~brian/Taco/Hollister/030103/index.html
http://www.norcalttora.com/~brian/Taco/Del Puerto/052503/index2.html

You may not have to notch your bumper like me (pic #2), but you will probably have to pound your pinch weld flat.

 

[4x4Dragon]

i should have some pics of mine up soon. 3" suspension and 2" body on 33x10.5's

 

[shortbus]

Im the red reg cab

http://community.webshots.com/album/145379769SWDyRG

http://community.webshots.com/album/219337147PKFYSh

 

[Mez]

Here's an old pic w/ 2" body:

 

[YoTRacer158]

is that picture from around here?

 

[TexasTRD]

yea it does not look too bad on any of the pictures...thanks for the posts yall

 

[Mez]

Ya, that is a spot behind the fields where cannon now meets college.

 

[shortbus]

Here's an old pic w/ 2" body:

How'd you get the rear bumper to sit flush? I have a 2" Roger Brown BL and mine has a wonderful 2" gap.

 

[Nelium]

How'd you get the rear bumper to sit flush? I have a 2" Roger Brown BL and mine has a wonderful 2" gap.

RB should have sent you a little kit to fix the bumper, he sent me one but i still haven't put it on.



- To the person who originally asked -
If you are going to get rock sliders you will have no problems at all. If not, it still isn't that noticable.

 

[shortbus]

Nope. All he told me was to flip the brackets and drill new holes and shit. Let's just say that didnt work. And I'm talking about the rear bumper not the front...and a 2" body lift.