Ya the guys plans are 3" lift and 33s for a year or 2 then when he gets the money where going to do a SAS then everything will for the better part get changed out and beefed up.
Sliders done 4:30 am finish other wize would have got some better installed pictures. Frames plated with 3/16 from front body mount to front bed mount. 1 3/4 .120 wall main tube 1 1/2 .120 wall outer tubes. 1/4 hot roll for the webbing
Sending out another feeler to see if anyone might be interested or knows a local shop that will do custom body work.
Basically I want to add some hood vents to my Taco.
Now because my Taco is my "nice" truck I want this to look good. So what I would settle for on my 88 won't cut the mustard...
Even though my 4Runner does not have LEDs the blinkers still act like crack heads. So today I did this:
http://www.pirate4x4.com/forum/toyota-truck-4runner/757093-led-fast-blinker-fix-81980-22070-a.html
Super easy, take out one resistor. I used a soldering iron but I bet it could be chopped out...
Alright, I guess it's time for a build thread.
GOAL: Rig capable of mild to moderate trails but maintaining it's usefullness for general camping and occasional errand running and trailer pulling.
So, no, I have no plans for SAS (at least not now :D) and it's not going to be a show rig but I am...
I know a few guys have it... Hows it holding up? Is the color fading at all? I'm thinking about grabbing some white for my bed but I'm scared it will yellow. Black is option b and would Be ok too. I like the texture I saw on the whale and Drews runner. The bed liner texture I saw on the site...
Here's the new rear bumper I've been working on for my 4runner. It's 11 gauge and really not too heavy. I'll build a tire carrier for it, when I have time, but the pivot/ hinge is already in.
TTORA forum is the best Toyota off-road club around. We are nation wide with chapters in most states. Come in and discuss Tacoma, 4Runner, Highlander, & TRD models.