TTORA Forum banner


1694 Views 9 Replies 8 Participants Last post by  Boheefus
Before all of you start saying no it wont fit i want to know from the people who run the 3+3 combo who are running 35in Dunlop Mud Rovers . I know most people say they wont but the Dunlops run about an inch small so its only a 34. Also i do mostly street driving with muddy trails hardcore crawling or flexing. Will it fit? I know the pinchweld will ahve to be beat to a pulp but how bad will the rubbing be?
1 - 1 of 10 Posts
People have done this. Unfortunately there was a lot of rubbing (a-arms, frame, body, etc.). People had to trim fenders, a little firewall (not just pinchweld), and take a lot of tupperware off of the bumper.

Edit - I think this was for under 6" total. My mistake. DeMello ran something similiar to this before he SAS'd. A former CO member, moved to CA ran 35's on modified Tundra coils or something without any major issues. He only had a few inches of lift from them too.
1 - 1 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.