32x11.5x15 w/ stock suspension?

3491 Views 9 Replies 6 Participants Last post by grillmasterp, Mar 10, 2005

ootsabryan

Discussion Starter · Mar 8, 2005

Just bought a 2000 trd prerunner. Dealer put 225/70/15's on the truck so yea it looks retarded. I was going to go with 31x10.5x15's but I do plan on putting on a 2.5" toytec lift in the next few months but I'd like to get tires first. My question is will the 32x11.5x15's fit on my stock trd suspension for a few months??? Will it work with the pinchweld mod? Or am I gonna have to wait till the lift gets put on for those tires to fit?

Thanks.

Also, how hard is it to put on the 2.5" lift? Done some basic mechanic work but never really that much on suspensions...

Save

1 - 2 of 10 Posts

Evan9r

· #6 · Mar 9, 2005

it all depends on your wheel size...if you have the stock 15x7 wheels then yes they will fit with very little rubbing off road and none on road. I had this combination for a while till I put a 3 inch lift on and now I have the same tires with 15x10 wheels and they rub pretty good on road, havent tried them off road yet, but I think they will rub bad, I have done the pinchweld and removed the fenders and they still rub when backing up and turning onroad, so im sure they will rub offroad.

Save

Evan9r

· #9 · Mar 10, 2005

read my post again, I had them on stock 7" wide rims and they work fine..but any wider and they might rub. Im not sure the difference in weight, if there was..Im sure they compensated for it with stiffer front springs or something, I think you will be ok no worries.

Save

1 - 2 of 10 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month