TTORA Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter #1
Will 32X11.5's on a 16X8 wheel with 4.5 backspacing look too small with the pro comp 4" lift?
Will I have rubbing problems with 4.5 backspacing as well?? Thanks for the opinions and pics if anyone has some.
 

·
Registered
Joined
·
340 Posts
4" is plenty for 32s. Backspacing-wise, you should probably shoot for 4" or less to minimize potential frame/a-arm rubbing.
 

·
Registered
Joined
·
2,130 Posts
I ran 32x11.5x15 bfg a/t's on the stock 15x7 4.5 backspaced wheels and didn't rub on the a-arm or anything for that matter.
 

·
Going John Galt
Joined
·
31,845 Posts
KStacoma said:
I ran 32x11.5x15 bfg a/t's on the stock 15x7 4.5 backspaced wheels and didn't rub on the a-arm or anything for that matter.
even aired down? interesting. Are the 32s just not quite tall enough to tag the upper spindle at the upper ball joint?
 
1 - 4 of 4 Posts
Top