I'm running 33 x 12.5 on stock runner rims. I adjusted to the front torsion bars added low pro bumps up front with new bils and installed a 2" AAL in the rear with new shocks. I have a little rub on the front sway bar, but who needs that thing anyway?
Cheap and easy. Lots of flex. The Superlift and other IFS lift kits will give you no more flex than you have now, and they cost a lot of money. use the money you saved to buy a locker.
I had the Superlift IFS 4 inch lift and it did great until I SAS. I ran 33s and they lift helped alot compared to stock. Look for one on ebay. I found mine for 530 bucks which came with everything except for tires and those even fit on my stock wheels.
If you want cheap lift do a body lift and crank front torsions and pick up some used xj coils from the yard they might be slightly longer the stock toy coils.
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
TTORA forum is the best Toyota off-road club around. We are nation wide with chapters in most states. Come in and discuss Tacoma, 4Runner, Highlander, & TRD models.