TTORA Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Folks I am having a problems with my clutch. I decided to flush the fluid and used a vacuum bleeder. After performing this I noticed my clutch was engaging about 1 in from the floor and the clutch would slowly engageevan with the clutch pressed to the floor. I rebled the system again with the vacuum bleeder and rebled the system the old school two-man way. I have checked the master and slave for leaks by checking under the boots for fluid. I checked the pedal mounting assy for cracked welds and proper operation. I have finally reordered the master and slave and will replace them. Any body got any ideas?
 
1 - 3 of 3 Posts
Top