TTORA Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 · (Edited)
Has anyone done a manual conversion on Tacomas,I redid a 2wheel dcab and stuck in the 5 spd ,clutch pedal assy,just have question on the wiring for the transmission and wiring harness in cab.I have some parts since I fix some on the side.The question is do I need a wiring harness from a 5spd 4x4 truck.Or can I use the auto harness.I am almost finished with the truck and I already have the fabtech 6 inch lift on the truck.
2003 Tacoma dcab-had a 2.7 motor-auto-REMOVED
Dcab v-6 frame
2003 v-6 Engine and 5 speed trans,4x4
I have a in cab harness 4x4? I dont know if it was from and auto or 5 speed?
Your help is much appreciated thanks.;) ;)
 

·
STITCH - Come and Take it!
2019 4RUNNER TRD Off-Road
Joined
·
9,051 Posts
Welcome to TTORA!
Use the Search Button and Newbie Tech thread to see if your question has been asked and answered in the past. Now post a pic of your ride!
 

·
Registered
Joined
·
2,509 Posts
confusing...
 
1 - 3 of 3 Posts
Top