TTORA Forum banner

Any input on wheel spacers...

2137 Views 11 Replies 6 Participants Last post by  PastorCJ
Ok, first I will apologize if this has been covered before, but I am curious as to whether there are any issues with putting wheel spacers behind my stock rims to get a little wider track. Will there be any significant stress on the CV's or front Diff? I'm only considering this because I just don't have the coin for new rims and tires...

Go easy on me....
1 - 1 of 12 Posts
with adapters, just make sure to use loctite and keep them torqued on a regular basis.
with 1/8" spacers the lug nuts are long enough but I'd use longer lugs for 1/4" spacers.

the thicker adapters up front will put more stress on the steering components but just lifting the truck does that anyway ;)
replace your OE rack bushings with an Energy suspension kit and re-torque a couple times after install. this well help save your rack...for a while.
1 - 1 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.