TTORA Forum banner
1 - 20 of 42 Posts

·
Premium Member
Joined
·
1,805 Posts
Discussion Starter · #1 ·
Some of the older guys will know what I'm talking about..

A few years ago, someone posted a PDF on making your own skidplate...more or less dimensions and measurements.

Anyone have a copy of this pdf?

I've search the usual places..and I don't have a delphi account to search the old forum....

Thanks!
 

·
Premium Member
Joined
·
12,934 Posts
I did a write up once about beefing up the stock plates. Cheap, simple and they held up to some pretty intensive pounding for a few years before I finally did the big cut. Now, I don't need no stinkin skid plate.
 

·
Premium Member
Joined
·
1,805 Posts
Discussion Starter · #5 ·
Thanks..My e-mail is goofing up so I can't check it right now.

My stock one is trashed, and I was hoping to axle swap before the takeover..but I could use the extra coin for a down payment on a house.
 

·
Premium Member
Joined
·
8,407 Posts

·
Stinks like fish
Joined
·
986 Posts
Exactley. Seems like a good idea to me, no dents, no rust and strong. Plud it should slide over rocks.
 

·
Registered
Joined
·
2,721 Posts
Bryanccfshr said:
Exactley. Seems like a good idea to me, no dents, no rust and strong. Plud it should slide over rocks.
Me too, I am going to take some measurements and see what I can come up with. I was reading that article and remebered a few buggies running them. I was able to find a cheaper source for the board as well when I typed in "Plastic Cutting Board".
 

·
Registered
Joined
·
255 Posts
I have some Autocad drawings of one member's palte design from back in the days (2003 I think). I converted them to .pdf so I could post them. I can't find the .pdf but I have the .dwg's if you're interested. The .pdf's may be at home. Let me know if Mudferret's were not what you were looking for.
 

·
Long lost Taco Owner
Joined
·
820 Posts
CronusTRD said:
Thanks..My e-mail is goofing up so I can't check it right now.

My stock one is trashed, and I was hoping to axle swap before the takeover..but I could use the extra coin for a down payment on a house.
As I said before, you can have my stock one. I have no use for it
 

·
Reppin the Flips on TTORA
Joined
·
814 Posts
AZTaco said:
I have some Autocad drawings of one member's palte design from back in the days (2003 I think). I converted them to .pdf so I could post them. I can't find the .pdf but I have the .dwg's if you're interested. The .pdf's may be at home. Let me know if Mudferret's were not what you were looking for.
That'll work for me. Can you email me the .dwg file?
Thanks!
 

·
Registered
Joined
·
2,721 Posts
AZTaco said:
I have some Autocad drawings of one member's palte design from back in the days (2003 I think). I converted them to .pdf so I could post them. I can't find the .pdf but I have the .dwg's if you're interested. The .pdf's may be at home. Let me know if Mudferret's were not what you were looking for.
If you want to shoot them to me that would be cool, I have CAD at work.
Thanks
 

·
Registered
Joined
·
2,721 Posts

·
Premium Member
Joined
·
1,805 Posts
Discussion Starter · #16 ·
ptrautne said:
As I said before, you can have my stock one. I have no use for it
Thanks for the offer.

I'll let you know if I take you up on it.
 

·
Banned
Joined
·
1,521 Posts
I just picked up a new DO skid plate.. The desgin is really slick, stout, and just tough. I could recomend anyone in the market for a skid to talk to Jason...
 

·
Registered
Joined
·
1,259 Posts
atwinda said:
I just picked up a new DO skid plate.. The desgin is really slick, stout, and just tough. I could recomend anyone in the market for a skid to talk to Jason...
Good plug for a stand up guy, but once again your post is completely irrelevant to the topic being discussed in the thread.

:banghead:
 
1 - 20 of 42 Posts
Top