[SteveO]

I've seen a few guys are running 2" BS but is it neccesary for a D44, stock Waggy springs and 35x12.5's? I'd like to keep the same wheels and not have them stick out any farther. I also don't want to have my new tires mounted up and find they don't fit. Thanks.

 

[Mike]

I've seen a few guys are running 2" BS but is it neccesary for a D44, stock Waggy springs and 35x12.5's? I'd like to keep the same wheels and not have them stick out any farther. I also don't want to have my new tires mounted up and find they don't fit. Thanks.

I'm running 3.25". I did have to adjust the steering stops to prevent the tires from getting into the springs.

Later,
....Mike

 

[Oppositeboy]

Hey Steve, you can run pretty much any back spacing you want (I suggest you go 1" :flipoff3: ). I ran 2" because of the 37's. If I were to do it again, I'd prolly go 2.5".

 

[CronusTRD]

I think 2.5/3" will help keep the tires out of the springs (increasing turning radius).

You don't want to go too far or it puts too much strain on the knuckle.

 

[SteveO]

Thanks all, I'll stick with the 3.25 for now then and see how it works. .....Steve

 

[Will Knox]

I have 3.75 on 15x10 and 35 12.50's and mine dont hit

 

[SteveO]

I have 3.75 on 15x10 and 35 12.50's and mine dont hit

Thanks for the input, I'll stick with my 3.25".