TTORA Forum banner

1 - 20 of 64 Posts

·
#1 cruiser
Joined
·
3,660 Posts
Discussion Starter #1
Well it was a good day. I did learn that Volcom is gone if you let him lead the pack! Lol as I didnt see anyone in front of me much most of the pics are of scotty my rig and the lc. Here we go!

[/IMG]
[/IMG]
[/IMG][/IMG]
[/IMG]
 

·
Registered
Joined
·
1,414 Posts
Looks like it was fun!
 

·
#1 cruiser
Joined
·
3,660 Posts
Discussion Starter #4
In the trail.
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG][/IMG]

Then Jerry broke! Sorry Jerry.
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
 

·
Registered
Joined
·
1,500 Posts
Nice pics Dan, thanks for taking so many! I was leading fast because I knew it was going to take a couple hours to get 8 of us through Liberty. I'll get my pics posted today sometime.

It wasn't Mythica's day from the start. He had tow rig starting issues, fuel
cell issues, and a broken d44 outer (wasn't beating on it either, I'm not quite sure why it broke). He got a late start and we knew indy and patriot was going to be a disaster with the huge amount of traffic lining up at the top. I spotted my little brother down independence in 7 minutes. He then drove out liberty in 25 minutes.

We dropped in and made decent time down to the intersection. The line to head up patriot was huge, behind a broken rig. Most opted to follow us out liberty. We turned around and orange crushed broke a front drive u joint. He got it fixed and we're on our way. A little way down the trail, Mythica broke a driver side chromo outer. He got it fixed and turned around. We had a group of 11 rigs behind us wanting to get out as well (they were stuck on patriot as well).

We were off the trail by 4:30. It was nice finally putting some faces to names and getting out wheeling.
 

·
#1 cruiser
Joined
·
3,660 Posts
Discussion Starter #6
I ony broke once. If I had the right tools I would have been fixed quicker. Needless to say I will upgrade my tool box. I dont believe I have ever seen the trail with that many rigs.
 

·
Registered
Joined
·
264 Posts
I saw that black 4runner yesterday in Springs when I was heading back to Denver. I think it was around 8:45am, I was in my 09 Tacoma. Not sure the location I was pretty much out of it

Edit: OH that was Scotty haha, awesome 4runner man! Dunno if you saw me or not, mine isn't much just a small lift 33s and some hellas up front
 

·
Registered
Joined
·
1,500 Posts

Me & the Orange Crusher


Eric down the waterfalls on Indy




Eric didn't even flinch, the kid's a natural behind the wheel of his Jeep


He nailed the turn and only had to backup once to make the corner. Usually takes us about 4-6 trys to make that corner




Down the last section of Indy




Posing on all the random rocks on the trail








CoToy91 down the slab


Then down the next tough section. Probably the toughest section on Liberty.


Scotty & Aspen


Air Randy taking tough line down the slab with Scotty in front of him


Sick down down the slab, Iroks stick like glue


Nice FJ40 for sure!








Trying to take the hardest lines possible on the trail










Eric's parking spot during the break in action


Pitbulls folding up nicely on the sharp rocks in Penrose


Nice CJ7 tailgate conversion


Testing out his new 5" rear strech with 57" rear springs






Last poser spot on the trail.
 

·
Registered
Joined
·
3,987 Posts
I'll throw my pics into the mix. We had a good time even without the pile, carb and single case would have sucked 75% of the day and made it that much worse for everyone else.

Pic-o-rama:






























































































...and there you have it. See ya next year!! (hopefully with a functioning rig)
>>Dan n Suz
 

·
#1 cruiser
Joined
·
3,660 Posts
Discussion Starter #12
Wow! Thats a ton of pics. I only posted what I thought were the good ones. Nice to see others got more pics of all the rigs. I had a blast. Lets not wait a year to do this again. Maybe less breaking.

Oh and to my future wife... Great job! I only broke it when I got behind the wheel. You ran it perfect.
 

·
Registered
Joined
·
370 Posts
Nice to meet you Orange Crusher. I agree on getting out. Breaking is a part of life in this hobby. I would have had parts for everyone and been helping out if it was Toyota stuff, but it was a bad day for dana axles/ ujoints on this trip
 

·
Registered
Joined
·
1,500 Posts
Wow! Thats a ton of pics. I only posted what I thought were the good ones. Nice to see others got more pics of all the rigs. I had a blast. Lets not wait a year to do this again. Maybe less breaking.

Oh and to my future wife... Great job! I only broke it when I got behind the wheel. You ran it perfect.
I posted what I had. I didn't get much since I was in the front.

She did really well behind the wheel! You might be out spotting more often if you keep up that breakage record :flipoff4:
 

·
Registered
Joined
·
1,500 Posts

·
#1 cruiser
Joined
·
3,660 Posts
Discussion Starter #17
Dont I know it! Thanks again for the invite Aaron.I think you win. Your truck is uglier than mine. Heck my still has everything on the inside. The one thing that must mke you so fast is all the weight reduction from inside! Lol forget the cage weight.:D
 

·
Registered
Joined
·
1,500 Posts
Dont I know it! Thanks again for the invite Aaron.I think you win. Your truck is uglier than mine. Heck my still has everything on the inside. The one thing that must mke you so fast is all the weight reduction from inside! Lol forget the cage weight.:D
No problem!

I think it's a tie in the ugly dept. Your square cut fenders and open sheetmetal in the rear tie my interior-less ride and multi-color paint scheme :flipoff4: :rofl: :lmao:
 

·
#1 cruiser
Joined
·
3,660 Posts
Discussion Starter #20
Nice to meet you Orange Crusher. I agree on getting out. Breaking is a part of life in this hobby. I would have had parts for everyone and been helping out if it was Toyota stuff, but it was a bad day for dana axles/ ujoints on this trip
Its just sad that your toy axles did better than my 1tons! It was fun no matter what and it was also nice to meet you! If anyone doing penrose again I want in!
 
1 - 20 of 64 Posts
Top