TTORA Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
662 Posts
Discussion Starter #1 (Edited)
These are Allied Daytona Series 51...They are 15x8 with 4" bs. I bought them from another member for my Tacoma thinking that they were 3.75" bs, and they hit my caliper. We also tried them on another Taco and they hit the caliper on that truck too. They were previously on a '93 SAS'd 4Runner. So all I ask is for you to be sure that these will work for you before buying them. I am asking $100+shipping, and they are located in Olympia, WA. Thanks.

SOLD
 

·
Registered
Joined
·
302 Posts
they will fit on the truck with a 1/4 inch spacer, I had a similar problem. The backspacing actually has nothing to do with it. I have the us wheel daytona 84 series and had to use 1/4 inch spacer and haven't had any problems since.
 

·
Registered
Joined
·
662 Posts
Discussion Starter #4
jdiesel said:
they will fit on the truck with a 1/4 inch spacer, I had a similar problem. The backspacing actually has nothing to do with it. I have the us wheel daytona 84 series and had to use 1/4 inch spacer and haven't had any problems since.
What do you mean the b/s has nothing to do with it? I have the same exact wheel with 3.75" b/s for my spare tire, and it doesn't hit the caliper...
 

·
Registered
Joined
·
302 Posts
My point is that if it was like my wheel, the us wheel series 84 it wouldn't have mattered whether it was 3.75 or 4, it was the way that the d holes were punched. The only way it would work was with a spacer. I was just letting you know my experience with a similar wheel. my caliper was hitting the d holes.
 
1 - 9 of 9 Posts
Top