TTORA Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
145 Posts
Discussion Starter #1
I am looking to purchase the URD 7th injector kit. I am hoping to get a measurement of how far out of the back of the supercharger the 7th injector goes toward the brake booster. If anyone that has a 7th injector kit could take a measurement and picture of how far it sticks out that would be awesome. let me know if you have a 1 or 2gen supercharger. THanks!
 

·
Registered
Joined
·
145 Posts
Discussion Starter #4
If anyone else needs to know its 64mm and the injector comes straight up so it no extra length. This is for people with a 3.4 swap and 1st gen supercharger to make sure it will fit without hitting brake booster.
 

·
Registered
Joined
·
422 Posts
If anyone else needs to know its 64mm and the injector comes straight up so it no extra length. This is for people with a 3.4 swap and 1st gen supercharger to make sure it will fit without hitting brake booster.
For me, the S/C got in the way of the heater control valve, i had to rotate it 45 degrees. I also have a 3" BL... you get that issue?
 
1 - 6 of 6 Posts
Top