TTORA Forum banner

camper shell 3rd brake light

2047 Views 3 Replies 3 Participants Last post by  Dunk
I scored a free camper shell today, woohoo! It's not the shiniest marble in the bag but it does the trick. Does anyone know the best way to wire up the 3rd brake light?? Thanks...
1 - 2 of 4 Posts
I took minde down to the Drivers side tail-light. There is a small space in the corner of the bed to feed the wires through. I used splice connectors, I think brakes were the green wire with the red stripe, I spliced into the tail-lights common ground too. Put some wire loom over to protect it and your set.
Yea...good idea. Although parallell splice connectors can be undone without cutting, a quick disconnect is a lot easier.
1 - 2 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.