TTORA Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
2,130 Posts
Discussion Starter #1
Hey guys,

I need to "eliminate" my rear o2 on my 85 runner as I swapped in a 5vz-fe 3.4L and put a blower on it and the exhaust is very free flowing :D

I read the following write up:
http://www.vfaq.com/mods/O2bypass.html
but am confused on which wire to use in addition to my signal wire.


So do I put the 1 mega ohm resistor in my o2 signal wire which is the red one?
If so, then what is the other wire that I attach the 1 micro farad capacitor to?

THank you SO MUCH!!!!
 
1 - 1 of 1 Posts
Top