TTORA Forum banner
1 - 14 of 14 Posts

·
Registered
Joined
·
1,299 Posts
Discussion Starter · #1 ·
Knuckles

Anyone want these for free? If no one wants them, they are getting tossed monday morning. These were on the axle I bought off another pirate member. I ended up getting new knuckles and these have been sitting in my garage. The previous owner cut the driver side steering arm and a few spindle studs are now missing. Dirver side is flattop and passenger side is not. Ball joints need to be replaced as well.

I'll be in Sac this weekend. If you are interested, email me at [email protected]
 

·
Registered
Joined
·
1,299 Posts
Discussion Starter · #3 ·
Timbuddha said:
I will take the drivers side one! I am in So-Cal and I don't mind paying shipping.
Are you going to Pismo? I might be able to catch someone before they head out from the East Bay area.
 

·
Cracker
Joined
·
5,648 Posts
dyogim said:
Knuckles

Anyone want these for free? If no one wants them, they are getting tossed monday morning. These were on the axle I bought off another pirate member. I ended up getting new knuckles and these have been sitting in my garage. The previous owner cut the driver side steering arm and a few spindle studs are now missing. Dirver side is flattop and passenger side is not. Ball joints need to be replaced as well.

I'll be in Sac this weekend. If you are interested, email me at [email protected]
If Tim falls through, I need both, will pay shipping.
 

·
Registered
Joined
·
1,299 Posts
Discussion Starter · #5 ·
valkyrie said:
If Tim falls through, I need both, will pay shipping.
Got you second in line. Tim only wants the driver side. So, you can still have the passenger side. Just to make sure you are aware, that it's not a flat top passenger.
 

·
Registered
Joined
·
1,299 Posts
Discussion Starter · #6 ·
I'll start getting them into boxes. Please email your address to ponsie-mike at comcast dot net. I'll get the shipping cost and let you guys know.
 

·
Registered
Joined
·
1,349 Posts
valkyrie said:
ahhh- NVM. I couldn't access the pic at work due to Websense. Thanks for the offer though...
chris,

i have a few sets of knuckes at the shop i think, if im not mistaken they are all flat top, ill check and get back with you if you want. they are all 6 stud knuckles so they are useless to me since mine have 5. or ill just sell you my whole front axle if you want :D
 

·
Registered
Joined
·
1,299 Posts
Discussion Starter · #9 ·
Timbuddha said:
I will take the drivers side one! I am in So-Cal and I don't mind paying shipping.
What's your info?
 

·
Registered
Joined
·
294 Posts
zszac111 said:
chris,

i have a few sets of knuckes at the shop i think, if im not mistaken they are all flat top, ill check and get back with you if you want. they are all 6 stud knuckles so they are useless to me since mine have 5. or ill just sell you my whole front axle if you want :D
If you have an extra drivers side FT, Ill take it! Lemme know what you want for one plz
Thanks man
 

·
Registered
Joined
·
1,349 Posts
cchark said:
If you have an extra drivers side FT, Ill take it! Lemme know what you want for one plz
Thanks man
i will check next time im at the shop and let ya know, i was there today taking my bed off and measuring for the exo but didnt stay to long. the axles are actually my buddies but he doesnt need them since all 3 of his rigs have dual 60's now.
 
1 - 14 of 14 Posts
Top