TTORA Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
17 Posts
Discussion Starter #1
HP Dana 44 from a 1976 Ford 1/2 ton, GM 6 bolt pattern, flat top knuckle, high steer draglink, warn axles, ctm u-joints, arb locker, 4:56 gears, warn premium hubs with 6" BDS leaf springs and Rancho RS9000 shocks. Asking $2,750.00 OBO.


Custom Toyota rear ('01 Tundra) Y-four link suspension using TJ coils, Rubicon Express Super Flex Joints, 12" Fox shocks with ARB and 4:56 gears. Asking $1,200.00 OBO
 

·
Registered
Joined
·
17 Posts
Discussion Starter #2
Bump - these axles are complete and ready to go. Here's a little more info for those looking for a built HP D44:

HP Dana 44 from a 1976 Ford 1/2 ton, GM 6 bolt pattern, WMS is 66", flat top knuckle - both knuckles are flap top and the passenger side is milled drilled and tapped , high steer draglink - dual custom built steering arms and spacers to get above the springs for the hy-steer configuration. From the center bolt flat knuckle to the draglink is 5.5 inches and to the steering arm (going to the steering box) is 7.25 inches. The original drag link mounts are still on in original OEM condition. Warn axles, CTM u-joints, ARB locker, 4:56 gears, Warn premium hubs with 6" BDS leaf springs and Rancho RS9000 shocks. Price is lowered to $2,400.00 and we can discuss shipping.

Custom Toyota rear ('01 Tundra) Y-four link suspension using TJ coils, Rubicon Express Super Flex Joints, 12" Fox shocks with ARB locker and 4:56 gears. Asking $1,200.00 OBO I'll sell the 3rd member separately which will include a rebuild kit containing a new Timken roller bearing, ARB air assembly and O-rings for $575 and you pay for shipping.
 
1 - 3 of 3 Posts
Top