TTORA Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
3,987 Posts
Discussion Starter #1
Since there was some interest in DOM and HREW pricing I called Glaser Steel (719) 634 4060 today and here you go:

HREW

1.25" 11ga $26 for 20 feet

1.5" 11ga $32 for 20 feet

DOM
1.25" .25" $8 a foot

1.5" .25" $10 a foot

hours are 8-4.30 M-Th and 8-4 Fridays

They're on the west side of C-Springs off of 31st and Hwy 24:
619 S 31st Street
C/C 80904

:welder:
 

·
Registered
Joined
·
4,770 Posts
I wonder what prices in Denver are like. I need some for my truck
 

·
Registered
Joined
·
3,987 Posts
Discussion Starter #5
Well crap, look at scrap prices: near $300/ton for loose steel, when 2-ish years ago it was under $100/ton. I'm in for some DOM; screw it. Who wants some? Figure I'll need 12 feet (room for lots of error) to build an anti wrap bar.
 

·
Registered
Joined
·
946 Posts
Ouch.

This makes me realize I got a good deal on my sliders. DOM 1.75" tubing, from trail gear was only $209 fully welded together.
 

·
Registered
Joined
·
279 Posts
Not quite the same thing, but I just picked up some 20g galvanized sheet 4'X3' for fifteen bucks from Altitude in Denver. I went a couple weeks ago, and they just gave me the stuff. I forgot to ask if they carried DOM. But if you want to mess with plate and HREW, they have a lot of cheap scrap.
 
1 - 8 of 8 Posts
Top