TTORA Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
517 Posts
Discussion Starter · #1 ·
can someone tell me the ratio of inches of thread showing on a donahoe coilover to actual lift height for an 05+ tacoma? and if anyone is running 2.5 inches of lift on theyre donahoes how much thread is showing on your coilovers? thanks ahead
 

·
Registered
Joined
·
1,337 Posts
You should also know that the amount of threads showing-vs-lift has to do with weight. If you have a big bumper and which, you will have different threads showing that someone with stock.
 

·
Registered
Joined
·
2,364 Posts
On the hoes, they come set at 2.0 inches of lift for a stock truck with no winch or bumper. 8 turns of the collar usually equals 1.0 inch of additional lift, but this varies from truck to truck. Also, the drivers side will need more turns, due to the additonal weight of the gas tank and driver.
 
1 - 3 of 3 Posts
Top