TTORA Forum banner

Door handle seal - loose?

1518 Views 3 Replies 3 Participants Last post by  toyguy
I was cleaning off some excess wax from the door handle and found the rubber gasket between the door handle and the door was kinda loose on the passenger door. Only on the top, the sides and the underside are snug.

How does this come loose?

If water gets in through there would it get on anything important or just leak out the bottom of the door?

Do you think I just need to pull the door panel and tighten up the mount bolts or what?

thanks
1 - 1 of 4 Posts
Seems like a minor thing when ya look at it (mine is the same way), you can let it go for a while without any major problems, but if water does get in there it will, like you said, drain out the bottom of the door... only problem is, that not ALL of it drains, and over time you're more likely to have a rust problem on the bottom of that door.
1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top