[SloPoke]

Got me a little project that requires me to remove the ADD system from the front diff. The tube with the ADD on it is attached to the diff by "E" bolts but I don't know what size. I'm hoping someone on here can tell me so I don't have to load the diff up and take it with me to get the socket.

Anybody know what size "E" socket is needed get to get the ADD and tube off the front diff?

TIA

http://www.wihatools.com/773serie.htm (e sockets for those unfamiliar)

 

[knoxtaco]

Got me a little project that requires me to remove the ADD system from the front diff. The tube with the ADD on it is attached to the diff by "E" bolts but I don't know what size. I'm hoping someone on here can tell me so I don't have to load the diff up and take it with me to get the socket.

Anybody know what size "E" socket is needed get to get the ADD and tube off the front diff?

TIA

http://www.wihatools.com/773serie.htm (e sockets for those unfamiliar)

dont know what size they are but I call them
torx sockets not e-sockets.

 

[ShowStop]

Got me a little project that requires me to remove the ADD system from the front diff. The tube with the ADD on it is attached to the diff by "E" bolts but I don't know what size. I'm hoping someone on here can tell me so I don't have to load the diff up and take it with me to get the socket.

Anybody know what size "E" socket is needed get to get the ADD and tube off the front diff?

TIA

http://www.wihatools.com/773serie.htm (e sockets for those unfamiliar)

Head over to Sears and pick up the Torx socket kits they have. The kit has like 6 different common sizes and that should cover your needs. Its in the automotive section and only runs about $15. I have the kit and needed it for situations like you described.

 

[Bighead]

I think the E12 Torx is what you are looking for.

 

[ptrautne]

Got me a little project that requires me to remove the ADD system from the front diff. The tube with the ADD on it is attached to the diff by "E" bolts but I don't know what size. I'm hoping someone on here can tell me so I don't have to load the diff up and take it with me to get the socket.

Anybody know what size "E" socket is needed get to get the ADD and tube off the front diff?

TIA

http://www.wihatools.com/773serie.htm (e sockets for those unfamiliar)

E14 is the size, I have it sitting on my desk

 

[SloPoke]

E14 is the size, I have it sitting on my desk

Thank you!

 

[grillmasterp]

http://www.sears.com/sr/javasr/product.do?BV_UseBVCookie=Yes&vertical=TOOL&pid=00947733000