TTORA Forum banner

Fabtech Coilovers

3418 Views 22 Replies 8 Participants Last post by  MadMaxz
Hello,
I recently had the Fabtech Performance 3.5" coilovers installed on my '02 4WD TRD double cab. I also have the Total Chaos 1" front diff drop installed. My front tires are now bowing slightly (not vertically center). The top of the tires are bowed slightly out (maybe a half to three quarters of an inch). I can't figure out what's causing it. The coilovers are currently set at about 3". Has anyone ever seen this or have any ideas what might be causing it? Below are some pictures. It's kinda hard to see the tires actually bowed, but you can see the dirt on the inside portion of the tire. That is the part that isn't making contact with the road.

http://seth.phizz.net/misc/truck

Thanks in advance,

Seth
21 - 23 of 23 Posts
my fault you got um set at 3" and have a 1" diff drop and the upper control arms.. seems to me that diff drop helped alittle with the cv angles.
MadMaxz said:
my fault you got um set at 3" and have a 1" diff drop and the upper control arms.. seems to me that diff drop helped alittle with the cv angles.
.

The diff drop made a huge difference on the angles. I know alot of people here are against the diff drop, but I just saw too much of an improvement on the cv angles with it in. Now the hell it caused me with my skid plates, that's another story. :banghead:
how much effective ground clearnce did you lose? and what skidplate are you using? nothing alittle custom fabrication cant fix right? im planing on a custom skid anyway.
thaNZ
21 - 23 of 23 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top