[ptrautne]

Well after my first trail ride with the fabtech lift, my "Strut" Bar looked like this:

So I welding 1/4" pipe to the bottom for my temp fix and it look like so:

Well after driving on trail 13 (blue/black) at Rausch Creek the temp fix did not work and this is what it looks like now

I believe that when the bar bent, it pulled the crossmember back because my truck now pulls to the passenger side so it is time for an alignment again.

 

[joeylead]

Well after my first trail ride with the fabtech lift, my "Strut" Bar looked like this:

So I welding 1/4" pipe to the bottom for my temp fix and it look like so:

Well after driving on trail 13 (blue/black) at Rausch Creek the temp fix did not work and this is what it looks like now

I believe that when the bar bent, it pulled the crossmember back because my truck now pulls to the passenger side so it is time for an alignment again.

My bars are bent as well. I loke having them there for strength reasons, but they are weak. This summer I may see if it is possible to have some custom ones made that would be stronger.