TTORA Forum banner

1 - 20 of 21 Posts

·
Registered
Joined
·
148 Posts
Discussion Starter #1 (Edited)
F.S. AirBox-Brided Rear brake line, Cdplayer

I have an airbox NO Mass air sensor. $50---SOLD
Rear extended brake lineSS Braided with both fittings- New never installed--23" long Made by russel-$30----SOLD
Cd tape player Toyota $50 used but never any probs---SOLD
Front A arm bushing--Energy suspension POLY- PN#8.3115g NEW $10

I bought them for my 98 then it got stolen. All prices do not include shipping.
Make Offer



 

·
Registered
Joined
·
104 Posts
I'm interested in the CD portion of the stereo, are you willing to separate the two? I am in San Diego as well.
 

·
Registered
Joined
·
104 Posts
Sounds reasonable to me, let me know how you want to handle payment. I have Paypal but am willing to do otherwise if needed or preffered. How hard is it to install, I have the same head unit and just want to add the CD player? I don't have to rip the dash apart do I? and yes I have the empty slot underneath my stock head. Thanks for the reply. I may reply late tonight or Saturday as I am leaving work right now. Thanks again.

Eric
 

·
Registered
Joined
·
104 Posts
message was sent to me so he may not get your reply, click on his reply tab not mine(ewood).
 

·
Registered
Joined
·
6,347 Posts
Jesters_taco said:
I have an airbox NO Mass air sensor. $50
Rear extended brake lineSS Braided with both fittings- New never installed--23" long Made by russel-$30
Cd tape player Toyota $50 used but never any probs
Front A arm bushing--Energy suspension POLY- PN#8.3115g NEW $10

I bought them for my 98 then it got stolen. All prices do not include shipping.
Make Offer




lower or upper a arm bushings?
 

·
Registered
Joined
·
148 Posts
Discussion Starter #10
ewood said:
Sounds reasonable to me, let me know how you want to handle payment. I have Paypal but am willing to do otherwise if needed or preffered. How hard is it to install, I have the same head unit and just want to add the CD player? I don't have to rip the dash apart do I? and yes I have the empty slot underneath my stock head. Thanks for the reply. I may reply late tonight or Saturday as I am leaving work right now. Thanks again.

Eric

In the back of the Tape deck, it has a plug for the cd player. Just plug it in and it should work fine. The cd palayer has the plug, all connectors are in great shape.
WEs
 

·
Registered
Joined
·
104 Posts
Sounds good to me. Let me know what to do about payment and we'll get the ball rolling. I'll PM you and give you my address for shipping and discuss payment. Thanks.
 

·
Registered
Joined
·
104 Posts
Any luck on the shipping yet? Just wondering when I should keep an eye out for the CD player. Thanks.
 

·
Registered
Joined
·
104 Posts
CD player doesn't work but the HU is fine. As soon as I installed it there was a horrible grinding noise (from CD player) and a CD that had been left in there came out. Pretty bummed about this so we need to work something out, $30 is too much to pay for something that doesn't work. I tried my HU and the one you sent and both worked fine but the CD palyer gave an error both times after it went through a series of bad noises for about 5 seconds. I tried multiple CDs' that work as well with nothing working. Let me know what the deal is cause this sucks. I'm sure it was not intentional but it is what it is and we for sure need to work this out. The package did not seem damaged at all from shipping as well.
 

·
Registered
Joined
·
104 Posts
I took the CD player apart and found the packing foam all over on the inside of the player. Removed the crap, closed it up and gave it another shot. It works now! Looks like the packing material just got all over the inside and was fouling the mechanical mechanisms inside the player making the grinding noise. Long story short it works and you can disregard the PM and previous post. Sorry about that and thanks again.

Eric
 

·
Registered
Joined
·
104 Posts
Still sounds a little off center, small clicking noise, like the suspension the disc sits in is off center and rubbing as it spins. I guess if I turn it up I can live with it.
 

·
Registered
Joined
·
104 Posts
Still clicking pretty bad this morning, so i guess my cleaning didn't really fix it after all, the CD is definetly off ceter in it's suspension and rubbing against something, this really blows. Any suggestions, I wouldn't mind giving it back considering it doesn't really work. :confused:
 
1 - 20 of 21 Posts
Top