TTORA Forum banner

1 - 4 of 4 Posts

·
Premium Member
Joined
·
59 Posts
Discussion Starter #1
Back in the days of the old site there was a chart that had the size shocks with part numbers based on the amount of lift you have.

What I need to know is what rear shocks do I need for a 2000 Tacoma V6 4x4 with 3" AAL and Cornfed lift.

I would like to use Rancho and would like part numbers for both the high and low end series...

thanks!

Bryan
 

·
Chicks Dig Body Damage
Joined
·
542 Posts
bryanb1 said:
Back in the days of the old site there was a chart that had the size shocks with part numbers based on the amount of lift you have.

What I need to know is what rear shocks do I need for a 2000 Tacoma V6 4x4 with 3" AAL and Cornfed lift.

I would like to use Rancho and would like part numbers for both the high and low end series...

thanks!

Bryan
If you go to www.wattora.com then click on "MODS" on the left column scroll to the bottom and there is a "database of shock lengths." That should be what you need.
 

·
Registered
Joined
·
196 Posts
i have the same lift you do on my 96 and i have the rs 5000's that came from cornfed
 
1 - 4 of 4 Posts
Top