TTORA Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
4,294 Posts
i think the the stock 3.4's have about 150rwhp, the supercharger only 3.4's are at about 200rwhp, and the URD/Supercharged 3.4's i've seen anywhere from 225-250rwhp
 

·
Administrator
Joined
·
18,281 Posts

·
Registered
Joined
·
565 Posts
ShowStop said:
The stock HP and torque ratings for both the 2.7 and 3.4 are listed in this thread:
www.tacomaterritory.com/forum/showpost.php?p=12425&postcount=3

Are there any graphs so we can determine what 'real world' HP would be.
I don't know about you, but I rarely, if ever rev up to 4,800 to 5,200 RPM....
So the 160 for the new engine and 150 for the old are not real in my-oh-so- humble-opinion :)
 

·
Registered
Joined
·
26 Posts
Discussion Starter #7
DakotaTacoma said:
Are there any graphs so we can determine what 'real world' HP would be.
I don't know about you, but I rarely, if ever rev up to 4,800 to 5,200 RPM....
So the 160 for the new engine and 150 for the old are not real in my-oh-so- humble-opinion :)
In my case the engine will see red line constantly<if needed>. Charts / graphs would be great to see where peak HP / torque are. This helps in gearing and set up. Big #'s at 4800 and 3600 are nice. I have a dyno chart for a SC motor, but mine will have to be non-SC'd
 
1 - 7 of 7 Posts
Top