TTORA Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
8 Posts
Discussion Starter · #1 · (Edited)
Hey Guys

I disconnected the battery for more than a day and now my idle is crazy and is sitting on 500 rpm and the engine is shaking

The "ONLY" thing I did was disconnect the battery to put a new one. Before this, everything was working normal

I have been looking on youtube but I don't find any DIY on how to reset for: 2nd Generation Tacoma 2.7 2TR-FE (My Car is a 2007)

BTW, I don't have any Malfunction Light on the instrumente panel.

I really appreciate your help

Thx & Rgds

Isaac

Speedometer Car Odometer Plant Tachometer
 

·
Administrator
95.5 Tacoma
Joined
·
18,689 Posts
The ECM is self learning. It starts at a base fuel trim and adjusts based on drive cycle performance. I've had the same problem with the older 2.7L, but it was using high idle, not low. After driving for a couple days the idle returned back to normal.
 

·
Registered
Joined
·
8 Posts
Discussion Starter · #4 ·
Hello Guys,

Well, my mechanic, reset the Electronic Throttle with his computer and now everything is OK. RPM are dead on 800 rpm at idle

Thx & Rgds
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top