[jhauffen]

The TTORA Johnson Valley run will be held on the 12th and 13th of March. The write up is posted at www.ttora-socal.com . I know that it falls only one week after the AZ run but I hope to see people out there any ways. Dan and I will be there to lead runs for those who want to join. I will be heading over to Cugar Buttes on sunday for a few hours to check out the Pro Rocks competition. I hope to see lots of people up there so if you think you'll be there just post on here to let us know how many to expect.
Thanks,

-John

 

[Pathtaco]

Is there anybody else going to this off road trip?? Or has it been canceled?

FS.

 

[jhauffen]

As far as I know it's still on . I think it might turn out to be a day run though :xcrybaby: . Dan is suppose to be out there leading a 4x4 run and I'm leading a rock crawling run. All I need is one other truck for my run and I'm there so well see what happens. Keep checking on the board.

-John

 

[Timbuddha]

Would love to join you guys, but I have got to get this Taco finished. Hopefully going to get some new sliders and a bumper on this thing. Have fun!! :xcrybaby:

 

[zszac111]

As far as I know it's still on . I think it might turn out to be a day run though :xcrybaby: . Dan is suppose to be out there leading a 4x4 run and I'm leading a rock crawling run. All I need is one other truck for my run and I'm there so well see what happens. Keep checking on the board.

-John

fly my truck from birmingham alabama and ill be there

one day ill run the hammers, one day. :xcrybaby:

 

[jhauffen]

I wish I could. It's not looking good for this run. Let me know if your ever out this way and I'll show you all that the hammers has to offer.

-John

 

[Tankota]

Did you try out your new rock buggy this last weekend?

I won't be making this run, I just did DV last weekend and I've got family coming into town for this weekend.. 8-( If only it was the NEXT weekend.. LOL..

 

[TMS2U]

I'll try to get my ass out there.

Whats the head count so far??

 

[TMS2U]

Just jumped on the Cali board and looks like this one may be a nogo

 

[jhauffen]

It does appear to be that way. I will be going up anyways because theres always someone out there to wheel with and I just love it up there. If you want to go (and you should ) just let me know and I'll meet up with you. I was hoping to see all the solid axle guys out there. Those are trails you SAS your truck for. Lyle should be riding shotgun with me so come on and have some fun.

-John

 

[jhauffen]

The buggy is awsome!!! It goes anywhere you point it. We even stopped off at the sand hills and took turns speeding around the bowls. We took a video camera and a still but took no pics.....how lame is that The only downside is that there is NO room for supplies for trail fixes. I guess its not suppose to break. It does however have a premeir power welder on it so I guess if you just take the welding leads you can fix anything.. :welder:

-John

 

[TMS2U]

I just might!

I think that I can only fit on aftershock tho

edit: you goin up Sat or Sun??

 

[jhauffen]

After shock is OK. I bet you'll be alright on sledge hammer. I know the upper two parts you'll be fine and I'm pretty sure the lower part would be alright also. Outer limits is a no no...Just ask Dan(blingtaco). I dont know how you feel about body damage but its always a possability up there.

It looks like Saturday will be the day.

-John

 

[Pathtaco]

I got my e-locker fixed and installed my transfer case skid plate so I am set to go.
Even if not too many are going I for sure be there on Saturday to challenge some of the trails hopfully some will tag alone if not I'll make it solo and then watch the rock crawling competition.

Anyone else going?

FS.

 

[jhauffen]

Great...we'll see you there.

-John

 

[BruceTS]

Just a little side note, Aftershock is a totally different trail these days. the rains washed most of the sand away, the boulders have moved around and now it has become one of the harder trails at Hammers.

Tedd, If you take your rig up Sledge Hammer, expect some body damage. A few areas were quite tight and I barely made it through. I'd like to go, but I doubt I can make it, have to work Saturday.

 

[TMS2U]

I was hoping you were gonna go on Sun as Sat is my nieces Bday.

I'll see if I can weasel out of it

Bruce- Thanks for the heads up, I pretty much knew that aftershock was the run least likely to turn my sheet metal into scrap. I am down for the tinbenders jambo so I hope to see you then if not sooner!

 

[BlingTaco]

I was hoping you were gonna go on Sun as Sat is my nieces Bday.

I'll see if I can weasel out of it

Bruce- Thanks for the heads up, I pretty much knew that aftershock was the run least likely to turn my sheet metal into scrap. I am down for the tinbenders jambo so I hope to see you then if not sooner!

Hey, I didn't know you were going to Tin Benders........I'm signed up for Sledge.....let's caravan up, there's already 2 or 3 in the group going up on thurs....

John..........there is a one percent chance I'll go this weekend, but it depends on whether I get my parts in from the mail...so I can have all my spares with me, and also depends on fixing a couple things, which is looking more possible now.....I ordered ctm's for my 44 so finally gonna stop breaking u joints...hopefully.....but I broke a shaft and 2 joints in az....and not going to jv without all the spares.................so keep me posted on your plans and if by friday, I get my shizzle, then I'll get my ass out there, k?

 

[jhauffen]

I'll keep my fingers crossed... I'd like to see all the stuff you've done to your truck... Just weld everything together so they won't break anymore..lol

-John

 

[BlingTaco]

I was hoping you were gonna go on Sun as Sat is my nieces Bday.

I'll see if I can weasel out of it

Bruce- Thanks for the heads up, I pretty much knew that aftershock was the run least likely to turn my sheet metal into scrap. I am down for the tinbenders jambo so I hope to see you then if not sooner!

Hey, did I see you on sunset ave last night, right around 6pm? hoggin my lane I was haulin ass but I thought that was you...