[drabnor]

hey guys, im posting for a bud.

he wants to put manual hubs on his 2000 ADD equiped taco. his truck has ABS. he bought spindles/cvs from a non-ABS manual hub taco. he wants to keep his ABS. he also has a spare set of ABS-ADD spindles. so he is going to have to get new manual hub bearings and get them pressed into the ABS-ADD spindles. he wants to reuse as much of the hub as possible.

does anyone have any links to a fsm that shows exactly how the hubs come apart? i looked all over the NE-TTORA site but all their links are dead.

any insights/comments/suggestions are welcome

thanks

 

[Tankota]

I have it for the ADD hubs with abs, but nothing on the manual hubs..

http://www.tankota.net/repair/Repair_Manual/03tacoma/sa/fah4wdpr/comp.pdf

 

[ShowStop]

hey guys, im posting for a bud.

he wants to put manual hubs on his 2000 ADD equiped taco. his truck has ABS. he bought spindles/cvs from a non-ABS manual hub taco. he wants to keep his ABS. he also has a spare set of ABS-ADD spindles. so he is going to have to get new manual hub bearings and get them pressed into the ABS-ADD spindles. he wants to reuse as much of the hub as possible.

does anyone have any links to a fsm that shows exactly how the hubs come apart? i looked all over the NE-TTORA site but all their links are dead.

any insights/comments/suggestions are welcome

thanks

Search ya n00b!!!
http://www.tacomaterritory.com/forum/showpost.php?p=30538&postcount=1

Basically he needs to press off the man hub assembly (bearing and all), and install that on the ADD spindle and re-use the spacer and timing ring for the ABS.

 

[stephenm]

if anyone knows where to fond a man locking steering knuckle for a 95 tacoma 4x4 i really need to find one mine is completely ruined

you can email me at : [email protected]

 

[rainman]

The actual steering knuckle between an add and manual hub is the same. The components are different. If you just need the steering knuckle and you're in so cal, I have 2 you can have as long as you pick them up.

 

[drabnor]

Search ya n00b!!!
http://www.tacomaterritory.com/forum/showpost.php?p=30538&postcount=1

Basically he needs to press off the man hub assembly (bearing and all), and install that on the ADD spindle and re-use the spacer and timing ring for the ABS.

you dope, thats a 2003 fsm, how the hell is it gonna have manual hub stuff in it? lol

but yea, he is going to buy new man hub bearings, get the add bearing pressed out of the abs spindle, and get the man hub bearings pressed into the abs spindle. then take the hub off the non abs man hub spindle and put it on the now man hub abs spindle. lol confused yet?

i need to find exactly what parts he needs to buy :banghead:

 

[rainman]

He will need the new manual hub bearings. Probably should get new inner and outer seals while you're at it. Also, you will probably need a new lock nut for the manual hub spindle, and he can reuse the abs collar from the add spindles he has. But it sounds like it would work fine.

 

[Rice Taco]

hey guys, im posting for a bud.

he wants to put manual hubs on his 2000 ADD equiped taco. his truck has ABS. he bought spindles/cvs from a non-ABS manual hub taco. he wants to keep his ABS. he also has a spare set of ABS-ADD spindles. so he is going to have to get new manual hub bearings and get them pressed into the ABS-ADD spindles. he wants to reuse as much of the hub as possible.

does anyone have any links to a fsm that shows exactly how the hubs come apart? i looked all over the NE-TTORA site but all their links are dead.

any insights/comments/suggestions are welcome

thanks

would this bud be me?

 

[Rice Taco]

:banghead:

that icon just about sums up this thread.

 

[ShowStop]

you dope, thats a 2003 fsm, how the hell is it gonna have manual hub stuff in it? lol

but yea, he is going to buy new man hub bearings, get the add bearing pressed out of the abs spindle, and get the man hub bearings pressed into the abs spindle. then take the hub off the non abs man hub spindle and put it on the now man hub abs spindle. lol confused yet?

i need to find exactly what parts he needs to buy :banghead:

Alright you dope...see if I send you copies of my 1995 FSM with the manual hub parts diagrams. (Sorry, no pdfs here...only printed book)

 

[drabnor]

Alright you dope...see if I send you copies of my 1995 FSM with the manual hub parts diagrams. (Sorry, no pdfs here...only printed book)

lol i was just messin with ya wanna make me a copy and mail it por favor? e-mail me and ill get you my address

 

[Murderman]

Alright you dope...see if I send you copies of my 1995 FSM with the manual hub parts diagrams. (Sorry, no pdfs here...only printed book)

What, no scanner? I thought this was the 21st century.

 

[ShowStop]

What, no scanner? I thought this was the 21st century.

Yeah, I've got a scanner, but I've got too much stuff stacked on top of it. Besides, I hate going that route. Way easier to make photocopies at work...

 

[Murderman]

Indeed, if y'all are local.

 

[drabnor]

thanks guys i think i got it