TTORA Forum banner

1 - 11 of 11 Posts

·
Registered
Joined
·
82 Posts
Discussion Starter #1
Anybody know where to get the hub body cone washers for a decent price. 1997 with manual locking hubs.
 

·
Registered
Joined
·
3,900 Posts
Idk but I have a set if all else fails
 

·
Registered
Joined
·
82 Posts
Discussion Starter #3
I kind of boogered the larger diameter ends up because I thought I need to tap there with a brass hammer instead of the hub body. They should still work but would like to replace if they are cheap. Should I put some anti-seize or something when re-installing, those guys wasted 1 hour of my weekend :mad:
 

·
NorCal Chapter Pres
Joined
·
12,202 Posts
Also, put anti seize and torque only to about 15ft lbs


Sent from my iPhone using Tapatalk
 

·
Going John Galt
Joined
·
31,839 Posts
Also, put anti seize and torque only to about 15ft lbs


Sent from my iPhone using Tapatalk
I think I torque mine to 30-35# 15 seems kinda light for a 8x.125
book says 31
 

·
Going John Galt
Joined
·
31,839 Posts

·
Registered
Joined
·
5,474 Posts
You can get them through toyota too, i also probably have a handful laying around from when I modified my hubs to take 7/16 bolts torqued to 80 ft/lb.



add about another 10k from Delphi :p
Someone needs a better hobby.....
 

·
Going John Galt
Joined
·
31,839 Posts

·
Registered
Joined
·
82 Posts
Discussion Starter #11
I remember those days, shoot I probably only have 100 total since i brought my truck in 2000. How do you end up being tagged as a verteran memeber, 500 post?
 
1 - 11 of 11 Posts
Top