TTORA Forum banner

1 - 20 of 28 Posts

·
Registered
Joined
·
626 Posts
Discussion Starter #1
I think I've got a pretty good trade going, but I need to figure out a driveline.

Here is what I've got to work with.
93' 4.3 V6 TBI
Ford HP D44 Front axle
FF D60 Rear
Leaf Sprung
86' Toyota Extra cab on a Std cab frame. WB should be around 106 to 110 with a Tube Bed.

What Transfer case / Doubler will give me a drivers side drop and still hook up to a TH350.

Get creative as you can.

Neil
 

·
Registered
Joined
·
2,489 Posts
When are you getting it? Where did you find it?
 

·
Registered
Joined
·
626 Posts
Discussion Starter #8
Its under a Ford and I'm not restricting myself to pass side drop. I'm looking for a th350 to 203 adapter so I can build a 203-205 doubler or ath350 to toy to d300 adapters.

Full width 63"+ axles are cool
 

·
Registered
Joined
·
626 Posts
Discussion Starter #10
You have to tig a block off plate onto the 231. The rest should bolt right up. Is it a mad Rooster or Northwest?
 

·
Registered
Joined
·
626 Posts
Discussion Starter #12 (Edited)
I think I've got a pretty good trade going, but I need to figure out a driveline.

Here is what I've got to work with.
93' 4.3 V6 TBI
Ford HP D44 Front axle
FF D60 Rear
Leaf Sprung
86' Toyota Extra cab on a Std cab frame. WB should be around 106 to 110 with a Tube Bed.

What Transfer case / Doubler will give me a drivers side drop and still hook up to a TH350.

Get creative as you can.

Neil
Well my plans have changed a little.

D60 up front.
H2 wheels with the 37" Krawlers

4.3TBI
4L60E with a full manual shift kit w/ engine braking in first.
NP231 Box for Rocks crawl box
Dana300
Triple stick shifter for crawl box and D300
D60FF rear
4Link rear w/ 1/4 elip. Springs.
 

·
Registered
Joined
·
1,510 Posts
i dont know what some of that is but it sounds pretty awesome
 

·
Registered
Joined
·
626 Posts
Discussion Starter #14 (Edited)
Got a lot done this weekend. Dismounted 4 and mounted 5 tires BY HAND. Did initial design and fab on a low profile front spring hanger. Destroyed yet another IFS truck in hopes that a straight axle will fit better.

So here are the pics.
 

·
Registered
Joined
·
2,348 Posts
Heck ya neil! Looks freakin awesome!!! :kewl:
 

·
Registered
Joined
·
626 Posts
Discussion Starter #16
As it sits right now it would be 22.5" to the frame. I'm going to have to raise it to 24 so that I have some up travel. ;)
 

·
Registered
Joined
·
312 Posts
NEIL!!! it looks awsome i missed your call saturday i've been so swammped with school and work give me a call tomorrow and let me know whats up sorry i havnt had a chance to call you back.
 

·
Registered
Joined
·
626 Posts
Discussion Starter #18 (Edited)
I got a lot done this weekend but not as much as I had planned.

New ideas kept me from my goal.

It is looking good and just to let you know I'm recycling a lot of parts that people didn't take home.



Ballisticfab spring hanger. I'll be including this in my spring hanger kit if anyone wants one.


Dana 60 steering arm I made.



Just use your imagination. I can see it. Can you?

Neil
 
1 - 20 of 28 Posts
Top