[Bear]

I need the heights of the front bumper as well as the height of the rocker panal of a NON lifted Tacoma. Perferably '95 to '99 model.

I never measured mine before I started lifting and now need to know those heights for some legal issues that have arised.

thanks in advance

P.s if this is not the correct folder for this question, I apologize and graciously asked a mod to move to the correct folder

 

[Dick Foster]

Just run down to a dealer and measure the distance from the ground to the bottom of the frame rail and go from there.

 

[themariachi]

this might help...had the same question
http://www.tacomaterritory.com/forum/showthread.php?t=2374&page=2&pp=10

 

[Bear]

Just run down to a dealer and measure the distance from the ground to the bottom of the frame rail and go from there.

Been meaning to do that for a while now, but most of the Toy dealers are on the completely opposite side of town from me. Just thought I could get a quick answer here and do what I need to do quicker if I asked.

besides I keep forgetting my tape measure at home!

Hey thanks for the links again. I think I might have a basis to go off of now. Where did you pick up your end links at for the sway?

 

[Dick Foster]

They came with the sway bar. Ask Chuck, he got it at rock something or other and I modified it to suit my setup. The pins for the lower attach points I made from bolts. You can get heims from a lots of places just search on FK or something. The harder bits to source on your own would be the torsion bar and bushing stuff.

 

[Bear]

Well thanks again Dick, Like I mentioned earlier, the sway bar is the last issue for me to sort out before I can start cutting.