TTORA Forum banner
1 - 7 of 7 Posts

· Registered
Joined
·
131 Posts
Discussion Starter · #1 ·
Did any one have the problem of the rim htting the calipor on the test fit of there new wheels on a TRD....(not sure but are the calipors bigger on a TRD vs NON-TRD) the wheels were 16x8 eagle alloy's with 4" backspacing but returned and thinking about getting M.T. Classic II's with 3-5/8" backspacing? Will these wheels fit because this wheel thing is getting old!!!?
 

· Registered
Joined
·
81 Posts
Actually having 16x8 4" backspacing American Racing Python and no problem...
 

· always a Toyota lover at heart
Joined
·
1,140 Posts
i bought one set of 15x8 Rockcrawlers with 3.75" backspacing, they fit just fine, no rubbing, they were perfect
I bougth new 15x10 Rockcrawlers and they rubbed the calipers, turned out the new rims were stamped, not cast and the holes had their inside rims stick out too far, I had to ground them down a bit
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top