[zszac111]

i have my non trd rear end out of a 2001 for sell if any one wants it. it has 4.10's in it and is welded, 200 bucks OBO, buyer pays shipping or picks up or meets me with in 2 hours of birmingham, AL. also have
5 33x12.50x15 bfg a/t ko's mounted on 15x8 black rock crawlers with 3.5" bs, the tires have im guessing around 30 % tread??? can stick a quarter in them or something and take a pic if needed, the wheels have some rock rash but nothing a can of spray paint cant handle. 200 bucks plus shipping or meet me like mentioned above. or take the axle and tires for 300 plus shipping. i can get some pics of any one is interested. also have 4 35x12.50.15 MT/R's with around 5% tread if that, would make good trail spares, 10 bucks each and buyer pays shipping, i think it was something like 35 bucks to ship from birmingham to Mike in CA through fed ex.

 

[zszac111]

*sold*

also have a spare 3rd, well just the housing part and pinion, it needs a new pinion seal, this is what the spare carrier was in. so a new pinion seal and carrier bearings and you have a complete spare 3rd.

 

[ATLRoach]

How much you want for the spare third zac?

 

[ricqik]

Do you have the fr r&p also. I'm looking for only the fr and rr r&p of 4.10's. If you have both fr and rr I'll give you $100 for the r&p's only, I don't need the carriers or housing.

 

[grillmasterp]

ZAC-
You wont be passing through Houston again, anytime soon will ya.

- The complete non TRD- rear- Is that everything drum to drum?
Which style rock crawlers?
I 'm interested in the Wheels & spare 3rd member w/ carrier-
Possibly the Non-TRD rear as well- if shipping/ transport isnt too crazy

send me a PM or email me
[email protected]

Thanks
Phong

 

[zszac111]

ZAC-
You wont be passing through Houston again, anytime soon will ya.

- The complete non TRD- rear- Is that everything drum to drum?
Which style rock crawlers?
I 'm interested in the Wheels & spare 3rd member w/ carrier-
Possibly the Non-TRD rear as well- if shipping/ transport isnt too crazy

send me a PM or email me
[email protected]

Thanks
Phong

dont think NWA will let me take an axle with me in first class i can check on shipping freight or whatever if you would like me to? anyone know what these axles weigh, and yes it is drum to drum. the wheels are the ones from 4wheelparts, the ones without the red stripe around the edge. i will get some pictures of the wheels and tires later on today if needed, they are at the shop so ill have to drive out there, i need to go out there and work on my truck alittle anyways.

 

[grillmasterp]

dont think NWA will let me take an axle with me in first class i can check on shipping freight or whatever if you would like me to? anyone know what these axles weigh, and yes it is drum to drum. the wheels are the ones from 4wheelparts, the ones without the red stripe around the edge. i will get some pictures of the wheels and tires later on today if needed, they are at the shop so ill have to drive out there, i need to go out there and work on my truck alittle anyways.

If you can email me some pics , that would be great
I've been looking to pick up a rear spare trd -
(I have 2 spare diffs w/ spider gears from my ARB & Bro's LSD installs)
also have a few used carrier bearings as well-

If anything- freight would most likely be strapping everything to a pallet

 

[zszac111]

If you can email me some pics , that would be great
I've been looking to pick up a rear spare trd -
(I have 2 spare diffs w/ spider gears from my ARB & Bro's LSD installs)
also have a few used carrier bearings as well-

If anything- freight would most likely be strapping everything to a pallet

sure, i can snap some pics tonight, it may be tomorrow sometime before i can get them over to ya. the shop i work at is about 45 miles away and i usually stay pretty late.

 

[grillmasterp]

sure, i can snap some pics tonight, it may be tomorrow sometime before i can get them over to ya. the shop i work at is about 45 miles away and i usually stay pretty late.

No rush at all Zac
Thanks

-Phong

 

[jdiesel]

Im interested in the wheels and tires. what are the specs on the wheels. where are you located? Im in nashville and have a place on smith lake so im down towards birmingham all the time. Will the wheels fit on my 97 without rubbing the calipers?
send some pics of the wheels. thanks
JD [email protected]

 

[zszac111]

Im interested in the wheels and tires. what are the specs on the wheels. where are you located? Im in nashville and have a place on smith lake so im down towards birmingham all the time. Will the wheels fit on my 97 without rubbing the calipers?
send some pics of the wheels. thanks
JD [email protected]

hard to say if they will or not. the 15x8 rockcrawler thing i never found a definate answer, some say they didnt fit and some say the did. i had to run a small spacer to clear my calipers on my 01 and ran it like that for the longest and never had one problem. ill snap some pics of the wheels and tires and post them up for everyone. it would be great if you got them (save my ass a trip to ship these things)

 

[zszac111]

as far as the things for sell. i hate selling stuff because 1: ive sold a pair of cv's on here before to someone in Cali and never saw the $$ so if you can pick up or meet me the better, not saying i wont ship (will if you have been around for a while and have a good rep) if not payment will be needed before i ship. 2nd reason is i hate having to keep up with who has dibs on shit (im lazy). first person who says the money is on the way gets it, that way no feelings get hurt and i dont have to hear people :xcrybaby:

 

[jdiesel]

yeah, just e-mail some pics to [email protected] thanks!

 

[ATLRoach]

Zac consider the 3rd sold I'll have to get with you about pick up or meet.

 

[zszac111]

Zac consider the 3rd sold I'll have to get with you about pick up or meet.

ok just let me know what you want to do. it will be next weekend before i can meet if thats what you decide to do.

 

[ATLRoach]

Zac, That sounds good to me..Let me know if you want me to go ahead and pay you to hold them for me.

 

[zszac111]

Zac, That sounds good to me..Let me know if you want me to go ahead and pay you to hold them for me.

if you just want to meet me then just pay me then, i can meet you around 5:30 somewhere inbetween birmingham and ALT during the week, and anytime during the weekend, you can hit me up on my cell phone after 3:00pm if you want. . if you want all of the stuff mentioned above i can make you a good deal on all of it

 

[zszac111]

yeah, just e-mail some pics to [email protected] thanks!

sorry i havent got a chance to get out to the shop and snap some pics, will try to do so this week sometime though.

 

[zszac111]

to the top.

 

[jon_7248]

assuming that the 33s are sold?