[DesertTRD]

I also want to say thank you to Jason Demello, Ive been in his shop for the past 4 years working with him on stuff and working on my own stuff. Everything I have done is because of him. He lets me use his tools, work on my projects in the shop and even some of the metal LOL. Hes just flat out one of the best friends I have.

Thanks Jason!

 

[Oppositeboy]

looks good Corey. Have you caged the engine yet?

 

[Ted]

Looks good. When is the 4 link?

 

[Half Baked Taco]

god damn, straight up titties, man!! If I ever had the balls to do my '04, it would have been a very simlar set-up to that. From front-end all the way to the back-end. (imitation is the best form of flattery)

 

[Half Baked Taco]

Ok, it would have been a combination of yours and Ryan Lewis's (StillDirty Bonzen)

 

[schcott]

thats sweet....hey, i didnt mean to insult you or Josh or anyone in that other post, sry if anyone took it that way....how much travel you have all around?? you puttin glass fenders in back?

 

[mudferret]

Sweet ass sweet motherfucking shit man! I can't wait to see your next jump shots.

 

[DesertTRD]

thats sweet....hey, i didnt mean to insult you or Josh or anyone in that other post, sry if anyone took it that way....how much travel you have all around?? you puttin glass fenders in back?

11.5 up front (strapped off) and 16 in the rear (strapped off)

no glass fenders in the rear until i put a t100 axle under it.. and right now i just want to go drive it in the dirt...

No offense taken, i was just putting a point across.

 

[hawthorne]

11.5 up front (strapped off) and 16 in the rear (strapped off)

no glass fenders in the rear until i put a t100 axle under it.. and right now i just want to go drive it in the dirt...

No offense taken, i was just putting a point across.

when you do the t100 axle are you going to beable to just swap the third member over out of your old axle? i asked this awhile ago on the utah board im some one said yes you could but i dont think they where 100% sure
and the truck looks great

 

[Ted]

when you do the t100 axle are you going to beable to just swap the third member over out of your old axle? i asked this awhile ago on the utah board im some one said yes you could but i dont think they where 100% sure
and the truck looks great

The T-100, Tundra, non-TRD Tacoma use the 8.4 diff (210mm). The TRD Elocker is 8 inches (200mm). If you have a non TRD tacoma, you can swap diffs, if you have the elocker it will not bolt up.

 

[DesertTRD]

when you do the t100 axle are you going to beable to just swap the third member over out of your old axle? i asked this awhile ago on the utah board im some one said yes you could but i dont think they where 100% sure
and the truck looks great

nope, elocker wont just swap over, on ryans truck the first axle he had we swapped teh bolt ring off the trd axle onto his non trd t100 rear end... worked good it really doesnt matter as far as teh trd part goes, i rarely use it anymore.

 

[Timbuddha]

Out freaking standing, Corey. You are building some crazy chit!!

 

[03trdblack]

What type of seats are those? Were they hard to get mounted or did you get brackets made for them?

 

[TiTRD]

Nice rig man, I've always loved desert trucks, but we have no desert on the east coast. It's hard to tell, but is your bed tube tied into the roll cage?

 

[Tankota]

Dang looks nice! and your truck is even clean.. Did you do the webing already?

 

[DesertTRD]

What type of seats are those? Were they hard to get mounted or did you get brackets made for them?

Beards, you can order seatmounts, i did have them bolted to teh floor at one time, but i mounted them to the cage now.. its much stronger that way

 

[DesertTRD]

Nice rig man, I've always loved desert trucks, but we have no desert on the east coast. It's hard to tell, but is your bed tube tied into the roll cage?

Yes it goes threw the cab and connects to the cage.. the cab is also welded up to those bars to remove all movement

 

[DesertTRD]

Dang looks nice! and your truck is even clean.. Did you do the webing already?

the front webbing isnt done yet, i need to get on that! but the floor is tied into the cage and the rear is.. its pretty solid already but i need more!

 

[hawthorne]

cool thanks for the info

 

[SEAN_at_TLT]

Why do you have the TC kit strapped off at only 11.5" when it can safely pull about 13"? Are you using modified Tundra CV's or custom widened Taco ones? Also what size tires are you running and how do they clear the stock bedsides at 16" of travel? Did you pull the bedsides a little bit? Just curious...

Looking really good!