PC and TM instructions here
1 - 8 of 8 Posts
Don't be too hard on him. Only the first one was broken until I saw the link to my site and broke it as well. I can't afford to have the whole club downloading that pig of a .pdf when this board gets rolling. I had posted it for one guy who asked nicely for the instructions in a thread 
Not Found
The requested URL /video/procomp4.pdf was not found on this server.
:newbie:
The requested URL /video/procomp4.pdf was not found on this server.
:newbie:
I think you can find TM instructions on their website as well.
1 - 8 of 8 Posts
Join the discussion
Recommended Reading
-
Locking rear shocks
SuspensionHey All, New to pickup trucks. Wife wanted a pickup for horse stuff so I finally broke down and bought an 09 Tacoma (4 door). It’s cherry and real low mileage. Other than a nuisance buzz in the console at 11-13 hundred RPMs under load and locking rear brakes, it’s a nice truck. Anyway, I have...- 6
- 229
-
-
HELP! 1994 pickup: TORSION BAR compromised?
SuspensionI recently got my hands on a Toyota 1994 Pickup, 4x4, 22RE truck. Truck's very clean and maintained at 260000 mi. Gonna be my DD and work truck. However, previous owner apparently hit a curb or something with the front driver's side tire, possibly even got hit by that side, don't precisely...- 1
- 489
-
Toyota_SMOr · updated
-
Overgreased Yoke
SuspensionI put way too much grease in my yoke, to the point where I could hear groaning from the front transfer case. Now what do I do to fix the situation?- 4
- 529
-
OME/ICON for 4 cyl
SuspensionI've done a good bit of reading on the OME setups for my 2010. Going to put an ARB on the front...I'm undecided if I'll do a winch down the road or not. I see most are running the 885's or 886's if running even more weight. But everything I've read is from people with the V6. Does having the 4...- 1
- 410
Join now to ask and comment!