yeah, that crap was soupy and nasty as hell. you had a nice, clean std cab. i love mine, hoping to have it forever. i grew up in overland park, where are you at flatlander?
I'm the original owner of a 2000 V6 4x4. It's got 170K mi and has lived a mostly easy life. I installed a 3" RevTek spacer lift kit in 2003 (mistake) and have had issues with tire wear and rough ride since. All these years alignment and tire shops were telling me it was all right but it wasn't...
Anyone know what the idler pulley bearing # is, ie 6201 or 6301 for a 3.4L?
I replaced it at 150K miles with a rear hub bearing from a motorcycle shop but didn't write in my log what it was.
Even better if you can tell me what bike rear hub is the same, I remember the bike shop required a bike...
I have a 98 V6 Tacoma, that has a frequent but intermittent stumble at mid RPM and part throttle. No CEL or stored codes, coil packs are original, plugs and wires were replaced in summer of 2018. It did seem one of the plug wires was not firmly staying connected to the coil, and I thought that...
03 Tacoma/03 Sequoia mixup. I have a 03 Tacoma with a bad 3RZFE, W59 tranny and J shift transfer case. I picked up an 03 Sequoia that had a tree fall on it. My question is, if i run the 2UZFE with a A340F, will i be able to run the J shift transfer case behind it?
Thanks,
Kenneth
Hey all, I am a newbie here as of today and am in the market for the parts needed to convert my 2001 Tacoma PreRunner 2.7l Auto to a 4WD. I really like the previous gen. Tacos (01-04) and also can't afford a new one and I think a conversion is just what I need so I can keep my truck till it...
TTORA forum is the best Toyota off-road club around. We are nation wide with chapters in most states. Come in and discuss Tacoma, 4Runner, Highlander, & TRD models.
hooyahdvr · updated 
