TTORA Forum banner

Pure Power Lubricants

1873 Views 9 Replies 6 Participants Last post by  not2XS
Hello everyone, hope this is acceptable to post here, wanted to get everyones thoughts...

PURE POWER makes some lifetime oil filters and called me today to see if I was interested in selling them.

Do any of you have any experience with this product? At $199 a pop would that be something that any of you would be interested in?

I placed the LINK to their site in case you wanted to take a look.

Anyhow, if anyone would be interested or has anything to share, could you please let me know!!

Heck if there is a lot of interest I would be happy to do a group buy.

Thanks as always, talk to you all soon!

1 - 2 of 10 Posts
not2XS said:
You do know that a magnetic field won't penetrate through steel don't you? The flux gets diverted and stays internal to the steel (or any other magnetic material).
I must be miss-understanding what you are saying here....because if not, your just flat out wrong. Your saying, if I put a magnet on 1 side of a piece of steel, I cant feel the magnetic field on the other side???? How do the magnetic oil-filter colars work then, the magnet is on the outside of the steel fiter case, the metal particals are attracted to the magnet though the saying this is impossible????
I'm soo confused on what you are saying.
ok, you arent saying it totally and compleately blocks magnetism comming though, it just blocks all it can until its saturated....that makes sense because if I were to
"take the magnet, stick it on a similar sheet of steel, take another piece of steel like a screwdriver or a fork or something, and feel for yourself what happens on the other side"
I know the attraction would be a great deal less, but from my experiences there would still be some....i guess it depends on the strength of the magnet and the thickness of the steel though.
Thanks for the clearification
1 - 2 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.