[Hutch98]

Checking to see if these will work -- 6" lift springs from procomp/superlift for GM trucks. The length is 56" with full weight on them and mine are @55 (98 Taco 4x4). The center pin to front/rear from superlift are f 25" r 27 1/2" unsprung( not on the vehicle-- but with full weight they measure out at 56". Looked around and called many places to see what the Taco spring unsprung dimensions are and no answer. Has anyone used these? Any info is good


Thanks

Hutch :xbeer3: :xbeer3:

 

[rojodiablo]

You are a pioneer on this one, I think.

 

[ianshoots]

Who did you contact? I bet wheelers offroad could tell you as I think they sell stock leaf replacement packs, and they are cool about answering questions.

 

[mudferret]

You'll end up with a LOT more lift than 6", I'm sure you knew that already. And the springs will be so wickedly arched as to not allow any flex. A friends brother installed full size lift springs on the rear end of his S-truck and it looked like a dog humping an oversized football.

 

[ianshoots]

A friends brother installed full size lift springs on the rear end of his S-truck and it looked like a dog humping an oversized football.

:rofl: :lmao: