[ELKTACO2]

For Sale in Colorado:
New front Poly bump stops.....10.00
New rear U-bolts, 11inch long w/ hardware....25.00
New rear 4inch spacer blocks (TC) w/ 5degree angle....10.00
Used 1inch front diff drop kit...10.00
New 20inch rear S.S. brake line w/ clip...20.00
Rims from 99 TRD w/ Big O A/T dual grooves, still have some life on 'em, rims in great shape....250.00
Stock Skids from 99TRD..slight scars....40.00
Rear Leafs w/ 2 1/2 Pro-comp AAL....80.00 (Sold)
Bilstein 5100's w/ boots for 4inches of lift. (model F4-BE5-6248-H5) used less than 2K miles...100.00
New upper ball joints...30.00
Stock upper A-arms.....50.00
Stock rear shocks used 65K miles.....SOLD
Stock front struts used 65K miles...SOLD
Front and rear 4:10 gears (75K miles), front includes spider housing...300.00
Stock rear shackles....10.00
Front bumper....50.00 (pending sale)


Price break if you buy it all.
Will trade all for a MIG welder of similar value.
Prices negotiable if reasonable offer rec'd.
You pay shipping of course.

Thanks,
Erik

 

[TacoCrazy]

Are the ball joints factory Toyota parts??

 

[ELKTACO2]

I doubt it, they came pressed into the Tuff Country spindles.
Erik

 

[spill_02]

For Sale in Colorado:
New front Poly bump stops.....10.00
New rear U-bolts, 11inch long w/ hardware....25.00
New rear 4inch spacer blocks (TC) w/ 5degree angle....10.00
Used 1inch front diff drop kit...10.00
New 20inch rear S.S. brake line w/ clip...20.00
Rims from 99 TRD w/ Big O A/T dual grooves, still have some life on 'em, rims in great shape....250.00
Stock Skids from 99TRD..slight scars....40.00
Rear Leafs w/ 2 1/2 Pro-comp AAL....80.00
Bilstein 5100's w/ boots for 4inches of lift. (model F4-BE5-6248-H5) used less than 2K miles...100.00
New upper ball joints...30.00
Stock upper A-arms.....50.00
Stock rear shocks used 65K miles.....20.00
Stock front struts used 65K miles...50.00
Front and rear 4:10 gears (75K miles), front includes spider housing...300.00
Stock rear shackles....10.00
Front bumper....50.00


Price break if you buy it all.
Will trade all for a MIG welder of similar value.
Prices negotiable if reasonable offer rec'd.
You pay shipping of course.

Thanks,
Erik

how are the leafs, if they're in good shape i will take em plus the diff drop and maybe a couple other things you got, but i need leafs. pic if you got em please

 

[ELKTACO2]

Yeah, they're in good shape. The front mount has the OEM bushings in and I still have the rear bushings, just not pressed in. I'll snap a pic tonight and post it tomorrow.

THANKS for the interest.
Erik

 

[ewood]

The Bilstein 5100s' are in good shape, if so I want them for sure. Let me know if these are still available and we can arrange payment. Thanks.

Eric

 

[ewood]

Actually, will these be the correct shocks for a rear with around 2.5 inches of lift? I know you stated they have boots for 4 inches, but would these work for my application? Thanks.

 

[ELKTACO2]

I had them on my truck with the AAL's and shackles and extended the bump stops 3 inches. Best thing to do is jack your truck up by the frame and measure from mount to mount (without shocks in place of course) and I'll get the ext/comp specs tonight and post that tomorrow. You would most likely have to extent your bump stops also. And, they are in excellent shape.

THANKS!
Erik

 

[ewood]

Thanks for the reply, I'll take a look at that tonight but I have a feeling they are a little too long. Thanks again for the reply.

 

[twblanset]

Where are you located? I am interested in the rims, but can you send me pictures?

 

[ELKTACO2]

Sure, I'll post a few pics tomorrow.
I live near Estes Park and work in Longmont. I'b be happy to meet up with you somewhere.

Erik

 

[ewood]

I'm going to pass on the shocks, thanks for the replies.

 

[surfpunk]

got manual hub spindles for sale by chance?

 

[twblanset]

Sorry, I didn't see the state in your first post. I'm in Cal. and that's a little too far.
Todd

 

[spill_02]

Yeah, they're in good shape. The front mount has the OEM bushings in and I still have the rear bushings, just not pressed in. I'll snap a pic tonight and post it tomorrow.

THANKS for the interest.
Erik

hey man definately i might take the whole rear setup and the diff drop like i said before plus im in vegas, nm so im pretty close, btw you can email at [email protected]

 

[ELKTACO2]

got manual hub spindles for sale by chance?

Sorry, nope. Kept those....for now.
Erik

Edited: I do have the stock spindles without the hubs pressed in. They would need new bearings and ball joints though. Make me an offer and I'll throw in the ball joints from the TC lift too.

Erik

 

[jimmytbud7]

ill take the bumper PM sent

 

[ELKTACO2]

hey man definately i might take the whole rear setup and the diff drop like i said before plus im in vegas, nm so im pretty close, btw you can email at [email protected]

Did you get the pics?
Lemme know,
Erik