TTORA Forum banner
1 - 11 of 11 Posts

· Registered
Joined
·
40 Posts
Discussion Starter · #1 ·
Is there a point where you shouldn't add a supercharger to an engine? Like after a certain amount of miles for example over 30,000 40,000 50,000 and so on?
 

· Registered
Joined
·
85 Posts
My 01 Taco S/C makes 230 to the rear wheels and 260 on the torque.My time slip is almost identical to yours but i ran a 14.693 @93.50 in the 1/4.What gives as you are making much more power than me? I am at sea level also.i actually ran 2 mph faster in the 1/8 mile than you also...
 

· Registered
Joined
·
866 Posts
2k1trd said:
My 01 Taco S/C makes 230 to the rear wheels and 260 on the torque.My time slip is almost identical to yours but i ran a 14.693 @93.50 in the 1/4.What gives as you are making much more power than me? I am at sea level also.i actually ran 2 mph faster in the 1/8 mile than you also...
I asked him the same thing once. The times he ran was on his first trip to the track ever, and he has some sever traction issues.

Chris
 

· Registered
Joined
·
749 Posts
CMB1998 said:
I asked him the same thing once. The times he ran was on his first trip to the track ever, and he has some sever traction issues.

Chris
Sorry 2K1trd hyjacked your post morenar----

I was a shitty driver at the drag strip! I only got to run twice and both launches were terrible! I'll be back. Waiting for the drag radials to come in.
I drive on the dyno well though :)

BTW---2K1, anytime you feel like you want to line up with the old man's truck---bring your wallet and let's play!

Dave
 

· Registered
Joined
·
1,242 Posts
Yes I did, thanks.

I was busy all day working on the XRunner. My fuel system is done. Now it is ready for something to use all that fuel capacity.

Brian was out here in DC and we parted company about 0100 hours this morning. Our assorted projects are kicking into high gear. You all are going to love this!!!
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top