i am going to replace mine on monday. dose anybody have any tips on how to do this or maybe a write up.
support drive shaft bearing
1 - 3 of 3 Posts
www.frankentaco.com has some great info.
yup, frankentaco's site is what ive used again and again
here is a direct link to it
http://128.83.80.200/taco/cb.html
here is a direct link to it
http://128.83.80.200/taco/cb.html
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
Locking rear shocks
SuspensionHey All, New to pickup trucks. Wife wanted a pickup for horse stuff so I finally broke down and bought an 09 Tacoma (4 door). It’s cherry and real low mileage. Other than a nuisance buzz in the console at 11-13 hundred RPMs under load and locking rear brakes, it’s a nice truck. Anyway, I have...- 6
- 202
-
-
HELP! 1994 pickup: TORSION BAR compromised?
SuspensionI recently got my hands on a Toyota 1994 Pickup, 4x4, 22RE truck. Truck's very clean and maintained at 260000 mi. Gonna be my DD and work truck. However, previous owner apparently hit a curb or something with the front driver's side tire, possibly even got hit by that side, don't precisely...- 1
- 485
-
Toyota_SMOr · updated
-
Overgreased Yoke
SuspensionI put way too much grease in my yoke, to the point where I could hear groaning from the front transfer case. Now what do I do to fix the situation?- 4
- 512
-
OME/ICON for 4 cyl
SuspensionI've done a good bit of reading on the OME setups for my 2010. Going to put an ARB on the front...I'm undecided if I'll do a winch down the road or not. I see most are running the 885's or 886's if running even more weight. But everything I've read is from people with the V6. Does having the 4...- 1
- 408
Join now to ask and comment!